Hi,

i built an app. You can connect to a mysensors ethernet gateway and it will display incoming messages.

It's not available through the app store. Here is the debug build of the app:

(link to debug build removed. Download via playstore)

Notes

• The app requires network access rights
• Installation of apps from "unknown sources" has to be enabled to install and use this
• • See: Settings/Advanced Settings/Security/Unknown Sources
• When connected, the app will keep the connection as long as the activity is in memory.

For some time i wanted to build a lamp based on a WS2801 led strip i had laying around. It was one with the more bulky bulbs. They are bright, but not as easy to build into something. Then i came across this lamp in a hardware store. I ordered a ws2801 led strip (the slim version) and started building. The lamp itself acts as a mysensor actor. It also contains a thermometer and a buzzer.

Video:
youtube link

Demo-Picture:

Code:
Since the code consists of 3 files i uploaded them to github

@pansen i'm gonna review the code this evening and will put it in the first post then.

The app is available via the play store since yesterday.

https://play.google.com/store/apps/details?id=aprivate.mysgw

Feedback is always welcome.

@sundberg84 Thanks for the positive feedback. I'm already testing v1.1a which includes an additional view where you can send messages into the network. A release can be expected next week.

The update 1.1 is online and should be available by tomorrow.

@sundberg84 Thanks for the positive feedback. I'm already testing v1.1a which includes an additional view where you can send messages into the network. A release can be expected next week.

The app is available via the play store since yesterday.

https://play.google.com/store/apps/details?id=aprivate.mysgw

Feedback is always welcome.

Hi,

i built an app. You can connect to a mysensors ethernet gateway and it will display incoming messages.

It's not available through the app store. Here is the debug build of the app:

(link to debug build removed. Download via playstore)

Notes

• The app requires network access rights
• Installation of apps from "unknown sources" has to be enabled to install and use this
• • See: Settings/Advanced Settings/Security/Unknown Sources
• When connected, the app will keep the connection as long as the activity is in memory.

@pansen i'm gonna review the code this evening and will put it in the first post then.

For some time i wanted to build a lamp based on a WS2801 led strip i had laying around. It was one with the more bulky bulbs. They are bright, but not as easy to build into something. Then i came across this lamp in a hardware store. I ordered a ws2801 led strip (the slim version) and started building. The lamp itself acts as a mysensor actor. It also contains a thermometer and a buzzer.

Video:
youtube link

Demo-Picture:

Code:
Since the code consists of 3 files i uploaded them to github

try to flash the "clear eeprom" sketch from the mysensors library and try again with your sketch.

The BH1750FVI IC can handle 4.5V max and the normal operating voltage is 2.4V-3.6V.
So it should be ok to desolder the voltage regulator and drive this thing from the 2xAlkaline or 3xNIMH