Drock1985 & Martin.
thanks guys i have it working just needed to do the full presentation and where it was.
just a newbie mistake.
thanks again
chilliman.

Drock1985 & Martin.
thanks guys i have it working just needed to do the full presentation and where it was.
just a newbie mistake.
thanks again
chilliman.

martin.
i am sorry i having a newbie moment i just need to understand what is happening so the way it is setup is good.
if so i have few more question , i have the gateway and all have a node with a motion sensor attached so how do i get the motion sensor to show up on HA .
sorry for not understanding its a very steep learning curve.

chilliman

Drock1985
please find attached HA start up file
0_1468799007226_HA-startup.txt

thanks
chilliman

drock1985
i just changed the conf file to with the latest and i get this error massage
16-07-17 23:16:27 mysensors.mysensors: File does not exist or is not readable: home/pi/.homeassistant/mysensors.json
16-07-17 23:16:27 mysensors.mysensors: Trying backup file: home/pi/.homeassistant/mysensors.json.bak
16-07-17 23:16:27 mysensors.mysensors: File does not exist or is not readable: home/pi/.homeassistant/mysensors.json.bak
16-07-17 23:16:27 mysensors.mysensors: Failed to load sensors from file: home/pi/.homeassistant/mysensors.json

chilliman

drock1985.
i cut and paste the example you posted but a get a error

16-07-17 23:07:10 mysensors.mysensors: File does not exist or is not readable: home/pi/.homeassistant
16-07-17 23:07:10 mysensors.mysensors: Trying backup file: home/pi/.homeassistant.bak
16-07-17 23:07:10 mysensors.mysensors: File does not exist or is not readable: home/pi/.homeassistant.bak
16-07-17 23:07:10 mysensors.mysensors: Failed to load sensors from file: home/pi/.homeassistant

not sure what is going on hopefully you can help me
chilliman

drock1985
do you have to have the persistence turned on , i turn on hass with pi (user)

mysensors:
gateways:
- device: '/dev/ttyUSB0'
persistence_file: 'path/mysensors2.json'
baud_rate: 115200

if i turn the persistence off i get a different error

16-07-17 21:42:41 mysensors.mysensors: File does not exist or is not readable: /home/pi/.homeassistant/mysensors1.pickle
16-07-17 21:42:41 mysensors.mysensors: Trying backup file: /home/pi/.homeassistant/mysensors1.pickle.bak
16-07-17 21:42:41 mysensors.mysensors: File does not exist or is not readable: /home/pi/.homeassistant/mysensors1.pickle.bak
16-07-17 21:42:41 mysensors.mysensors: Failed to load sensors from file: /home/pi/.homeassistant/mysensors1.pickle

any ideas?

chilliman

Martin.
i have purchased a raspberry pi 3 running Debian Jessie loaded Home Assistant which working great i have add MySensors Gateway with a motion sensor node there is no error as regards to not opening the usb port (it says found and has open it) what i am getting error :-

16-07-17 16:46:03 mysensors.mysensors: File does not exist or is not readable: path/mysensors.json
16-07-17 16:46:03 mysensors.mysensors: Trying backup file: path/mysensors.json.bak
16-07-17 16:46:03 mysensors.mysensors: File does not exist or is not readable: path/mysensors.json.bak
16-07-17 16:46:03 mysensors.mysensors: Failed to load sensors from file: path/mysensors.json

what do i have to do to get this working correctly any ideas

chilliman

martinhjelmare
what version of ubuntu do you i should i use 14.04 ,15.10 or 16.04LTS i am more that happy to reinstall the OS i am just trying to get Home Assistant and MySensors working correctly

thanks for you help
chilliman

hi.
i was not able to access the desktop from the start i reload the OS three time make sure i select the correct option (the one i through i needed), as it boots up it ask me for my password screen clears and comes up with Opp's where was a problem and goes back to the sign in screen

chilliman

martinhjelmare
i had to check the info from the gateway and sensor on a different m/c for some reason the install on Debain 8.5 i was unable to access the desktop .
for the gateway :-
0;0;3;0;9;gateway started, id=0, parent=0, distance=0
0;0;3;0;14;Gateway startup complete.

for the sensor( motion sensor)
send: 3-3-0-0 s=255,c=0,t=17,pt=0,l=5,sg=0,st=ok:1.5.1
send: 3-3-0-0 s=255,c=3,t=6,pt=1,l=1,sg=0,st=ok:0
sensor started, id=3, parent=0, distance=1
send: 3-3-0-0 s=255,c=3,t=11,pt=0,l=13,sg=0,st=ok:Motion Sensor
send: 3-3-0-0 s=255,c=3,t=12,pt=0,l=3,sg=0,st=ok:1.0
send: 3-3-0-0 s=1,c=0,t=1,pt=0,l=0,sg=0,st=ok:
0
send: 3-3-0-0 s=1,c=1,t=16,pt=0,l=1,sg=0,st=ok:0
1
send: 3-3-0-0 s=1,c=1,t=16,pt=0,l=1,sg=0,st=ok:1
0
send: 3-3-0-0 s=1,c=1,t=16,pt=0,l=1,sg=0,st=ok:0

add both:-
0;0;3;0;9;gateway started, id=0, parent=0, distance=0
0;0;3;0;14;Gateway startup complete.
0;0;3;0;9;read: 3-3-0 s=1,c=1,t=16,pt=0,l=1,sg=0:0
3;1;1;0;16;0
0;0;3;0;9;read: 3-3-0 s=1,c=1,t=16,pt=0,l=1,sg=0:1
3;1;1;0;16;1
0;0;3;0;9;read: 3-3-0 s=1,c=1,t=16,pt=0,l=1,sg=0:0
3;1;1;0;16;0

hope you make some sense of this numbers
if you need any info please let me know so i can get it for you , do you know why i can not open the debian desk ?
chilliman