Posts made by discorover0

discorover0

Never mind I updated to 1.4 and tweaked the code all is working fine.

discorover0

When load the arduino software this is the serial monitor
I have a gateway, a motion detector, and a temperature monitor all on a vera 3 with ui7
My garage door opener uses a 5:10 modified window control jason.
My motion control is node 2
My temperature is node 6
when the temperatue node updates the garage door arduino sees it as node 200 and starts to really screw up.
This node shuts down and will not function all other nodes work fine.
Plese help!

Here is the serial monitor from arduino
Started sensor.
Sending: from=5, to=255, childId=255, mtype=4, type=9, crc=235, '', sent via 255
Sent successfully
Received: from=0, to=5, childId=255, mtype=4, type=10, crc=51, '0'
Mess crc ok.
Message addressed for this node.
Using relay 0. Distance is 0
Relay=0, distance=1
Relaying message back to gateway.
Sending: from=5, to=0, childId=255, mtype=0, type=17, crc=94, '1.2+', sent via 0
Sent successfully
Relaying message back to gateway.
Sending: from=5, to=0, childId=255, mtype=4, type=7, crc=100, '0', sent via 0
Sent successfully
Relaying message back to gateway.
Sending: from=5, to=0, childId=10, mtype=0, type=3, crc=8, '1.2+', sent via 0
Sent successfully
Relaying message back to gateway.
Sending: from=5, to=0, childId=10, mtype=2, type=2, crc=69, '', sent via 0
Sent successfully
Received: from=0, to=5, childId=10, mtype=3, type=2, crc=152, '0
'
Mess crc ok.
Message addressed for this node.
Received: from=0, to=5, childId=10, mtype=1, type=3, crc=235, '100
'
Mess crc ok.
Message addressed for this node.
Relaying message back to gateway.
Sending: from=5, to=0, childId=10, mtype=1, type=3, crc=150, '100
', sent via 0
Sent successfully
100
Relaying message back to gateway.
Sending: from=5, to=0, childId=10, mtype=1, type=2, crc=245, '1', sent via 0
Sent successfully
Relaying message back to gateway.
Sending: from=5, to=0, childId=10, mtype=1, type=3, crc=116, '0', sent via 0
Sent successfully
0
1
Relaying message back to gateway.
Sending: from=5, to=0, childId=10, mtype=1, type=2, crc=146, '0', sent via 0
Sent successfully
Relaying message back to gateway.
Sending: from=5, to=0, childId=10, mtype=1, type=3, crc=116, '0', sent via 0
Sent successfully
Relaying message back to gateway.
Sending: from=5, to=0, childId=10, mtype=2, type=3, crc=163, '', sent via 0
Sent successfully
Received: from=0, to=5, childId=10, mtype=3, type=3, crc=126, '0
'
Mess crc ok.
Message addressed for this node.
0
1
1
Relaying message back to gateway.
Sending: from=5, to=0, childId=10, mtype=1, type=2, crc=146, '0', sent via 0
Sent successfully
Relaying message back to gateway.
Sending: from=5, to=0, childId=10, mtype=1, type=3, crc=116, '0', sent via 0
Sent successfully
Received: from=0, to=5, childId=10, mtype=1, type=3, crc=235, '26
'
Mess crc ok.
Message addressed for this node.
Relaying message back to gateway.
Sending: from=5, to=0, childId=10, mtype=1, type=3, crc=150, '26
', sent via 0
Sent successfully
26
0
0
Relaying message back to gateway.
Sending: from=5, to=0, childId=10, mtype=1, type=2, crc=146, '0', sent via 0
Sent successfully
Relaying message back to gateway.
Sending: from=5, to=0, childId=10, mtype=1, type=3, crc=138, '100', sent via 0
Sent successfully
Relaying message back to gateway.
Sending: from=5, to=0, childId=10, mtype=2, type=3, crc=163, '', sent via 0
Sent successfully
Received: from=0, to=5, childId=10, mtype=3, type=3, crc=61, '100
'
Mess crc ok.
Message addressed for this node.
100
0
0
Relaying message back to gateway.
Sending: from=5, to=0, childId=10, mtype=1, type=2, crc=146, '0', sent via 0
Sent successfully
Relaying message back to gateway.
Sending: from=5, to=0, childId=10, mtype=1, type=3, crc=138, '100', sent via 0
Sent successfully
Received: from=0, to=5, childId=10, mtype=1, type=3, crc=103, '82
'
Mess crc ok.
Message addressed for this node.
Relaying message back to gateway.
Sending: from=5, to=0, childId=10, mtype=1, type=3, crc=26, '82
', sent via 0
Sent successfully
82
Relaying message back to gateway.
Sending: from=5, to=0, childId=10, mtype=1, type=2, crc=245, '1', sent via 0
Sent successfully
Relaying message back to gateway.
Sending: from=5, to=0, childId=10, mtype=1, type=3, crc=116, '0', sent via 0
Sent successfully
0
1
Relaying message back to gateway.
Sending: from=5, to=0, childId=10, mtype=1, type=2, crc=146, '0', sent via 0
Sent successfully
Relaying message back to gateway.
Sending: from=5, to=0, childId=10, mtype=1, type=3, crc=116, '0', sent via 0
Sent successfully
Relaying message back to gateway.
Sending: from=5, to=0, childId=10, mtype=2, type=3, crc=163, '', sent via 0
Sent successfully
Received: from=0, to=5, childId=10, mtype=3, type=3, crc=126, '0
'
Mess crc ok.
Message addressed for this node.
0
1
1
Relaying message back to gateway.
Sending: from=5, to=0, childId=10, mtype=1, type=2, crc=146, '0', sent via 0
Sent successfully
Relaying message back to gateway.
Sending: from=5, to=0, childId=10, mtype=1, type=3, crc=116, '0', sent via 0
Sent successfully
Received: from=208, to=208, childId=208, mtype=0, type=13, crc=13, '

'
Mess crc error.
Received: from=208, to=208, childId=208, mtype=0, type=13, crc=13, '

'
Mess crc error.
Received: from=0, to=5, childId=10, mtype=1, type=3, crc=30, '20
'
Mess crc ok.
Message addressed for this node.
Relaying message back to gateway.
Sending: from=5, to=0, childId=10, mtype=1, type=3, crc=99, '20
', sent via 0
Sent successfully
20
Relaying message back to gateway.
Sending: from=5, to=0, childId=10, mtype=1, type=2, crc=245, '1', sent via 0
Sent successfully
Relaying message back to gateway.
Sending: from=5, to=0, childId=10, mtype=1, type=3, crc=116, '0', sent via 0
Sent successfully
0
1
Relaying message back to gateway.
Sending: from=5, to=0, childId=10, mtype=1, type=2, crc=146, '0', sent via 0
Sent successfully
Relaying message back to gateway.
Sending: from=5, to=0, childId=10, mtype=1, type=3, crc=116, '0', sent via 0
Sent successfully
Relaying message back to gateway.
Sending: from=5, to=0, childId=10, mtype=2, type=3, crc=163, '', sent via 0
Sent successfully
Received: from=0, to=5, childId=10, mtype=3, type=3, crc=126, '0
'
Mess crc ok.
Message addressed for this node.
0
1
1
Relaying message back to gateway.
Sending: from=5, to=0, childId=10, mtype=1, type=2, crc=146, '0', sent via 0
Sent successfully
Relaying message back to gateway.
Sending: from=5, to=0, childId=10, mtype=1, type=3, crc=116, '0', sent via 0
Sent successfully
Received: from=208, to=208, childId=208, mtype=0, type=13, crc=13, '

'
Mess crc error.
Received: from=208, to=208, childId=208, mtype=0, type=13, crc=13, '

'
Mess crc error.
Received: from=208, to=208, childId=208, mtype=0, type=13, crc=169, '

'
Mess crc error.
Received: from=208, to=208, childId=208, mtype=0, type=13, crc=201, '

'
Mess crc error.
Received: from=208, to=208, childId=208, mtype=0, type=13, crc=137, '

'
Mess crc error.
Received: from=2, to=64, childId=16, mtype=1, type=16, crc=44, '1'
Mess crc error.
Received: from=19, to=19, childId=19, mtype=3, type=49, crc=49, '1'
Mess crc error.
Received: from=19, to=19, childId=19, mtype=3, type=49, crc=49, '1'
Mess crc error.
Received: from=19, to=19, childId=19, mtype=3, type=49, crc=49, '1'
Mess crc error.
Received: from=19, to=19, childId=19, mtype=3, type=49, crc=49, '1'
Mess crc error.
Received: from=19, to=19, childId=19, mtype=3, type=49, crc=49, '1'
Mess crc error.
Received: from=19, to=19, childId=19, mtype=3, type=49, crc=49, '1'
Mess crc error.
Received: from=19, to=19, childId=19, mtype=3, type=49, crc=49, '1'
Mess crc error.
Received: from=19, to=19, childId=19, mtype=3, type=49, crc=49, '1'
Mess crc error.
Received: from=19, to=19, childId=19, mtype=3, type=49, crc=49, '1'
Mess crc error.
Received: from=19, to=19, childId=19, mtype=3, type=49, crc=49, '1'

Here is the Arduino code:
#include <Sensor.h>
#include <SPI.h>
#include <EEPROM.h>
#include <Servo.h>
#include <RF24.h>

#define SERVO_DIGITAL_OUT_PIN 3
//#define SERVO_MIN 1 // Fine tune your servos min. 0-180
//#define SERVO_MAX 0 // Fine tune your servos max. 0-180
int pulsePin = 8;
int openDoor = 4;
int doorV =0 ;
int lastDoorValue = 0;
int closed =1;
// Set RADIO_ID to something unique in your sensor network (1-254)
// or set to AUTO if you want gw to assign a RADIO_ID for you.
#define RADIO_ID 5
#define CHILD_ID 10 // Id of the sensor child
Sensor gw(9,10);
//Servo myservo; // create servo object to control a servo
// a maximum of eight servo objects can be created Sensor gw(9,10);

void setup()
{
Serial.begin(BAUD_RATE);
gw.begin(RADIO_ID);
// myservo.attach(SERVO_DIGITAL_OUT_PIN);
// Register all sensors to gw (they will be created as child devices)
gw.sendSensorPresentation(CHILD_ID, S_LIGHT);
// Fetch servo state at startup
gw.getStatus(CHILD_ID, V_LIGHT);
setRelayStatus(gw.getMessage()); // Wait here until status message arrive from gw
pinMode(openDoor,INPUT);
pinMode(pulsePin,OUTPUT);
//gw.sendVariable(CHILD_ID,I_BATTERY_LEVEL );
//setRelayStatus(gw.getMessage());

}

void loop()
{

if (gw.messageAvailable()) {
  // New messsage from gw
  message_s message = gw.getMessage(); 
  setRelayStatus(message);
 gw.getStatus(CHILD_ID, V_DIMMER);
 setRelayStatus(gw.getMessage());
 doorV=digitalRead(openDoor);

if (lastDoorValue != doorV) checkStatus();
// Serial.println(lastDoorValue);
//Serial.println(doorV);
//Serial.println( readVcc(), DEC );
}
}
void setRelayStatus(message_s message) {
if (message.header.type==V_DIMMER) { // This could be M_ACK_VARIABLE or M_SET_VARIABLE
int val = atoi(message.data);
Serial.println(val);
if (val > 0){
doorUp();
delay (750);
checkStatus();

 }
 if (val == 0){
    doorDown();
    delay (750);
    checkStatus();
    
 }

}

if (message.header.type==V_UP){
  doorUp();
  delay (750);
  checkStatus();
}
 if (message.header.type==V_DOWN) {
  doorDown();
  delay (750);
  checkStatus();
}
 if (message.header.type==V_STOP) {
  doorStop();
  delay (750);
 checkStatus();
}

}

void doorUp(){
doorV=digitalRead(openDoor);
if (doorV == 1){
digitalWrite(pulsePin, HIGH);
delay (750);
digitalWrite(pulsePin, LOW);
gw.sendVariable(CHILD_ID, V_LIGHT, 1);
// myservo.write(SERVO_MIN);
gw.sendVariable(CHILD_ID, V_DIMMER,0);
}
delay (750);
lastDoorValue=0;

}
void doorDown(){
doorV=digitalRead(openDoor);
if (doorV == 0){
digitalWrite(pulsePin, HIGH);
delay (750);
digitalWrite(pulsePin, LOW);
gw.sendVariable(CHILD_ID, V_LIGHT, 0);
//myservo.write(SERVO_MAX);
gw.sendVariable(CHILD_ID, V_DIMMER,100);
}
delay (750);
lastDoorValue=1;

}

void doorStop(){
digitalWrite(pulsePin, HIGH);
delay (750);
digitalWrite(pulsePin, LOW);
delay (750);
}
void checkStatus(){
doorV=digitalRead(openDoor);
Serial.println(lastDoorValue);
Serial.println(doorV);
if (doorV == 0){
gw.sendVariable(CHILD_ID, V_LIGHT, 0);
// myservo.write(SERVO_MAX);
gw.sendVariable(CHILD_ID, V_DIMMER, 100);
lastDoorValue=0 ;
}
if (doorV == 1){
gw.sendVariable(CHILD_ID, V_LIGHT, 0);
// myservo.write(SERVO_MIN);
gw.sendVariable(CHILD_ID, V_DIMMER, 0);
lastDoorValue=1;
}
}

discorover0

Yes I have tried various pin outs with 0 success. There is a new rf24 library for the Leonardo that is not compatible with your calls.

discorover0

I currently have 4 Nano's running with my vera3. I have been able to prototype with a Uno. The Leonardo is giving me fits.
I have wired the Leonardo to this link using the three pins on the ICSP connector for SCK,MOSI.MISO
http://arduinoexamples.wordpress.com/2012/11/11/nrf24l01-com-arduino-leonardo-nrf24l01-with-arduino-leonardo/
i cannot get the leonardo to talk to the Rf24. Has enyone had success with the leonardo?