Do all your gateways use separate channels and/or base radio id?
All my gateways are basically 'canned code' which I downloaded from the MySensors site. I haven't made any changes to the code. Do I need to?
Everything has been running just great for about 10 months or more.
I just started seeing these anomalies lately.
Can you see any patterns in which node ids are unknown?
I see no patterns that I would recognize. Node IDs generally seen to increment, but by random amounts, but some IDs seem to be 200 or higher.
Have you reflashed any of your gateways lately?
No...I added a larger 22uF cap to the power/ground on the 2.4G radio after this started happening, but it had no improvement.
Are there any other messages in the log that can give a clue to what is happening?
I've sent three images. One of the Hardware/2.4G setup, One of the error list and one of a child node with an unknown temp and humidity node that shouldn't be there. I get about 10-15 Unknowns appearing every day. I just delete them and move on.
Could someone else have deployed a MySensors network near you?
I'd say that's pretty unlikely but I could put out a notice on our Home owners association website.
The system seems to be running normally except for this issue. If I need to make changes regarding the channels, base radio, etc. I'll certainly do it.
Thanks for the response...I appreciate it