Re: Vera edge and Serial Gateway
Hello all,
Can someone provide me the arduino code that work for you for Serial Gateway. The code that needs to be uploaded on the arduino via arduino IDE.
Thanks

Hello there,
I have bought the new FTDI Nano. But still not working.
I have the following error on my vera:
MySensors plugin : Cannot send command - communications error
Thanks to advise.

hello hek,
Thanks for the advise.

Hello NITRO BURN,
Can you please advise if you tested this one :
http://www.ebay.com/sch/i.html?_nkw=ftdi+arduino+nano
and if it is working?

Hello all,
Please help me out on above.
Thank you

Hello,
I have check on my nano, nowhere seems to write FTDI.

Can I buy this one:
http://www.ebay.com/itm/Nano-V3-0-with-ATMEGA328P-FT232RL-FTDI-Micro-controller-Module-for-Arduino-/281145520990?hash=item417594335e:g:qzAAAOxy9ERSR-Wc

How are the connection done, shall the usb cable I used to connect to my PC be connect to the VERA via USB port?

If I want to connect
http://www.ebay.com/itm/FT232RL-3-3V-5-5V-FTDI-USB-to-TTL-Serial-Adapter-Module-for-Arduino-Mini-Port-/381374421597?hash=item58cbafda5d:g:jk8AAOSwrklVMjIp
with my actual Nano, how shall I connect it?

Shall I disconnect the serial gateway afterwards?

Thanks for the advise. Can you please tell me how to connect the
USB to Serial:
http://www.ebay.com/sch/i.html?_nkw=ftdi+usb+to+serial
to my arduino nano. On which pin shall I connect it?

Can you please advise which Arduino nano shall I buy, please share a link from ebay

Hello,
The chip is atmel atmega328P and atmel mega 1602

@korttoma said:

USB serial chip in the

Can you please tell me the steps how to create a serial gateway and how to upload the plug in VERA edge and how to connect the Serial gateway to VERA.

@korttoma said:
Hell Tomas,
Thanks for your prompt response.. What I have done I have just created the gateway uploaded the coded. The same USB cable that I connect to the PC for which I used to upload the code, I have remove it from the PC and plug it directly to the VERA ege. Is is correct?

Hello team,
I have an issue to connect my serial gateway to my vera edge. I have manage to construct the serial gateway but when I tried to connect it to my vera via USB, VERA cannot recognise it. I manage to install all the libraries also. See snap shot below.
Can you please help

********0_1475902598820_Code.txt

@dylan.balloo said:

Please find below error message:

**C:\Users\CNXS1101\Desktop\Ethertnet_Module\Ethertnet_Module.ino:92:25: fatal error: UIPEthernet.h: No such file or directory

#include <UIPEthernet.h>

                 ^

compilation terminated.

exit status 1
Error compiling for board Arduino Nano.**********

Hello team,
Can you please help me. I am trying to create ab ethernet module but cannot upload the code on my arduino nano. See attached the code use. Please find below error message:

********0_1475902598820_Code.txt **C:\Users\CNXS1101\Desktop\Ethertnet_Module\Ethertnet_Module.ino:92:25: fatal error: UIPEthernet.h: No such file or directory

#include <UIPEthernet.h>

                     ^

compilation terminated.

exit status 1
Error compiling for board Arduino Nano.**********

Great Thanks mate

Thank you for the prompt response. In fact I have manged to do so. When I check the "managed libraries"- it stated installed. Does this mean that it is correctly installed.

hello team,
I have downloaded the latest release on mysensor but I can't find the folder library. Can someone please help me out.
Thanks
Regards
Dylan