Posts made by ebo

Hi @derwish

What is the current status about the project to node.js?
still moving?

Hi,

I'm using a esp8266 with the Mysensors code to use it as a gateway.
It receives messages from a node, and is sending them to the controller.
so far it look ok.

when logging the gateway I see the following:
0;255;3;0;9;Client 0: 0;0;3;0;18;PING
0;255;3;0;9;TSP:MSG:READ 4-4-0 s=3,c=1,t=0,pt=7,l=5,sg=0:20.0
0;255;3;0;9;TSP:MSG:ACK msg
0;255;3;0;9;!TSP:MSG:SEND 0-0-4-4 s=3,c=1,t=0,pt=7,l=5,sg=0,ft=0,st=fail:20.0
0;255;3;0;9;TSP:MSG:READ 4-4-0 s=2,c=1,t=1,pt=7,l=5,sg=0:44.0
0;255;3;0;9;TSP:MSG:ACK msg
0;255;3;0;9;!TSP:MSG:SEND 0-0-4-4 s=2,c=1,t=1,pt=7,l=5,sg=0,ft=0,st=fail:44.0
0;255;3;0;9;Client 0: 0;0;3;0;18;PING
0;255;3;0;9;Client 0: 0;0;3;0;18;PING
0;255;3;0;9;TSP:SANCHK:OK
0;255;3;0;9;Client 0: 0;0;3;0;18;PING

so, it looks that all the messages are sent in error?
What could be wrong?
Also on the node I don't see any ack messages.

Regards,
Edward

ok, that make things clear!
I will give that a try.

Thanks so far.

I did already, but none is implementing the time and the level interrupt with falling.
could be that I'm not understanding it right...

if I use the sleep function with level interrupt I can not specify the function to run when awaking from the level interrupt.
maybe i'm missing something?
in my current sketch with only level interrupt I have the following:

void enterSleep(void)
{

	/* Setup tipInterrupt as an interrupt and attach handler. */
	attachInterrupt(tipInterrupt, awake, FALLING);
	delay(100);
	set_sleep_mode(SLEEP_MODE_PWR_DOWN);
	sleep_enable();
	sleep_mode();
	/* The program will continue from here. */
	sleep_disable();
}


void awake(void)
{
	detachInterrupt(tipInterrupt);
	tipCount++;
	attachInterrupt(tipInterrupt, tip, FALLING);
	tipped = true;
}

how to convert this to mysensors sleep with a timer?
Thanks,
Edward

Hi,

I have a question on how to use the sleep with the timer and with a level interrupt.

I want to use a level interrupt to catch a tipping bucket
and want to do periodic checks (battery, temperature, etc)

I''m looking at the sleep function from mysensors, but could not find a way to catch the level interrupt when it is falling.
also I need to do some debouncing..

What is your advice?
Regards,
Edward