This has all the information i need:
1.25mm pitch (i'm assuming for 7pins it should be interchangeable with a 1.27mm pitch)
also from left to right: PWM, Tx, Rx, VCC, GND, AOUT, HD
https://web.opendrive.com/api/v1/download/file.json/NDVfMzUyMzMyM18?inline=0
This has all the information i need:
1.25mm pitch (i'm assuming for 7pins it should be interchangeable with a 1.27mm pitch)
also from left to right: PWM, Tx, Rx, VCC, GND, AOUT, HD
https://web.opendrive.com/api/v1/download/file.json/NDVfMzUyMzMyM18?inline=0
I need to use this sensor but there is very little documentation on the flying lead header pitch. i need to use a connector that will securely fit the flying wire off of the sensor board to my PCB. but i don't know the pitch it is using, from pictures it looks like either the 1.27mm pitch or 1.5mm pitch. Can someone who has this sensor please help me?
I would also be very interested in what each colour of the flying wire corresponds to which signal.
cheers,