Excellent ! It's perfect, thank's a lot rejoe2 !
Jonathan Pucel
@Jonathan Pucel
Best posts made by Jonathan Pucel
Latest posts made by Jonathan Pucel
-
RE: 💬 Relay
Hello everybody !
I would like to creat a sensor with two relays and two buttons to command this relay direct from the sensor (with actualisation of their stat in domoticz)
Someone know the code to do this ? I'm a complete newbie on mysensor !Thank's a lot !
-
RE: Philips LivingColors MySensor node
@tias said in Philips LivingColors MySensor node:
74LVC125A
Thanks for the reply Tias ! I'm completely noob in electronic ! Another (stupid) question, for the 3.3v regulator, is the 100nf capacitor can be replaced by a 220nf capacitor without consequence ?
-
RE: Philips LivingColors MySensor node
@yveaux said in Philips LivingColors MySensor node:
@jonathan-pucel the post above states :
To make it easier to connect the CC2500 antenna to the Arduino I decided for a Arduino Pro Mini 3.3V. This avoids one of the 74LVC125A-circuits
So I guess the actual wiring is different from the schematic. As all is powered by 3.3v I assume the 74LVC125A is not required indeed.
Hi Yveau,
Thank's for the answer but I think you're wrong. Tias has been inspired by Ivo Knutsel's instructions and in his instructions the circuit have 2 74LVC125A.
-
RE: Philips LivingColors MySensor node
Hello,
I know this is an old topic but i'm very interrested by this controller !
However i want to know if the 74lvc125A must be used ?
I have all the other components so if it's possible to don't use it, it will be perfect !
Thank's to all !