Hi!

I need to get some data from Vera.
I have some virtual sensors in Vera and lua scripts that fetches data from internet to them in some variables. Float and string. I need to get that data to process in sensor node. What are the ways?
Sending data from Vera to node or getting data from Vera in node?

Can you help me with this?

I use 1.3 library in all my sensor network.
Thanks!

Library 1.3

@hek thanks. will try with different power source.

Gateway already has stabilised power source (with capacitors). Sensor powered by usb from macbook. Just added capacitors to sensor too.

No changes.

Strange with this:

normal sensor start:
send: 0-0-0-0 s=255,c=0,t=17,pt=0,l=5,st=ok:1.4.1
send: 0-0-0-0 s=255,c=3,t=6,pt=1,l=1,st=ok:0
send: 0-0-0-0 s=255,c=3,t=11,pt=0,l=18,st=ok:Temperature Sensor
send: 0-0-0-0 s=255,c=3,t=12,pt=0,l=3,st=ok:1.0
1 #number of DS
send: 0-0-0-0 s=0,c=0,t=6,pt=0,l=5,st=ok:1.4.1
send: 0-0-0-0 s=0,c=1,t=0,pt=7,l=5,st=ok:86.6
0 #result of gw.getConfig().isMetric
86.60 #temperature in F, but needed in C.

Sensor start in inclusion mode:

x00x00sensor started, id 0
send: 0-0-0-0 s=255,c=0,t=17,pt=0,l=5,st=ok:1.4.1
send: 0-0-0-0 s=255,c=3,t=6,pt=1,l=1,st=ok:0
send: 0-0-0-0 s=255,c=3,t=11,pt=0,l=18,st=fail:Temperature Sensor
send: 0-0-0-0 s=255,c=3,t=12,pt=0,l=3,st=fail:1.0
1
send: 0-0-0-0 s=0,c=0,t=6,pt=0,l=5,st=fail:1.4.1
send: 0-0-0-0 s=0,c=1,t=0,pt=7,l=5,st=ok:80.1
0
80.10

After pressing several times reset while including. I have 2 devices. Node and temperature. Bu temperature stil in F and Mysensor plugin doesn't react on changing Metric/Imperial settings. Vera doesn't show "Save" button.

Hi!

Have a problem to include DallasTemperatureSensor to Vera

Then I press Start at Vera web interface and reset sensor, only 1 device appears in vera.
Only Arduino node.

x00x00sensor started, id 0
send: 0-0-0-0 s=255,c=0,t=17,pt=0,l=5,st=ok:1.4.1
send: 0-0-0-0 s=255,c=3,t=6,pt=1,l=1,st=ok:0
send: 0-0-0-0 s=255,c=3,t=11,pt=0,l=18,st=fail:Temperature Sensor
send: 0-0-0-0 s=255,c=3,t=12,pt=0,l=3,st=fail:1.0
send: 0-0-0-0 s=0,c=0,t=6,pt=0,l=5,st=fail:1.4.1
send: 0-0-0-0 s=0,c=1,t=0,pt=7,l=5,st=ok:79.3

Gateway:
0;0;3;0;5;0
0;0;3;0;2;Get Version
0;0;3;0;2;1.4.1
0;0;3;0;9;read: 0-0-0 s=255,c=0,t=17,pt=0,l=5:1.4.1
0;255;0;0;17;1.4.1
0;0;3;0;9;read: 0-0-0 s=255,c=3,t=6,pt=1,l=1:0
0;0;3;0;9;read: 0-0-0 s=255,c=3,t=11,pt=0,l=18:Temperature Sensor
0;0;3;0;9;read: 0-0-0 s=255,c=3,t=12,pt=0,l=3:1.0
0;0;3;0;9;read: 0-0-0 s=0,c=0,t=6,pt=0,l=5:1.4.1
0;0;0;0;6;1.4.1
0;0;3;0;9;read: 0-0-0 s=0,c=1,t=0,pt=7,l=5:79.7
0;0;1;0;0;79.7
0;0;3;0;9;read: 0-0-0 s=0,c=1,t=0,pt=7,l=5:79.5
0;0;1;0;0;79.5
0;0;3;0;9;read: 0-0-0 s=0,c=1,t=0,pt=7,l=5:79.7
0;0;1;0;0;79.7
0;0;3;0;9;read: 0-0-0 s=255,c=0,t=17,pt=0,l=5:1.4.1
0;255;0;0;17;1.4.1
0;0;3;0;9;read: 0-0-0 s=255,c=3,t=6,pt=1,l=1:0
0;0;3;0;9;read: 0-0-0 s=255,c=3,t=11,pt=0,l=18:Temperature Sensor
0;0;3;0;9;read: 0-0-0 s=255,c=3,t=12,pt=0,l=3:1.0
0;0;3;0;9;read: 0-0-0 s=0,c=0,t=6,pt=0,l=5:1.4.1
0;0;0;0;6;1.4.1
0;0;3;0;9;read: 0-0-0 s=0,c=1,t=0,pt=7,l=5:79.7
0;0;1;0;0;79.7
0;0;3;0;9;read: 0-0-0 s=255,c=0,t=17,pt=0,l=5:1.4.1
0;255;0;0;17;1.4.1
0;0;3;0;9;read: 0-0-0 s=255,c=3,t=6,pt=1,l=1:0
0;0;3;0;9;read: 0-0-0 s=255,c=3,t=11,pt=0,l=18:Temperature Sensor
0;0;3;0;9;read: 0-0-0 s=255,c=3,t=12,pt=0,l=3:1.0
0;0;3;0;9;read: 0-0-0 s=0,c=0,t=6,pt=0,l=5:1.4.1
0;0;0;0;6;1.4.1
0;0;3;0;9;read: 0-0-0 s=0,c=1,t=0,pt=7,l=5:79.7
0;0;1;0;0;79.7
0;0;3;0;9;read: 0-0-0 s=0,c=1,t=0,pt=7,l=5:79.5
0;0;1;0;0;79.5
0;0;3;0;9;read: 0-0-0 s=0,c=1,t=0,pt=7,l=5:79.7
0;0;1;0;0;79.7
0;0;3;0;9;read: 0-0-0 s=0,c=1,t=0,pt=7,l=5:79.5
0;0;1;0;0;79.5
0;0;3;0;2;Get Version
0;0;3;0;2;1.4.1
0;0;3;0;9;read: 0-0-0 s=0,c=1,t=0,pt=7,l=5:79.7
0;0;1;0;0;79.7
0;0;3;0;9;read: 0-0-0 s=0,c=1,t=0,pt=7,l=5:79.5
0;0;1;0;0;79.5
0;0;3;0;9;read: 0-0-0 s=0,c=1,t=0,pt=7,l=5:79.7
0;0;1;0;0;79.7

Sometimes after including I see one device temperature sensor without arduino node.

And finally gw.getConfig().isMetric always == 0. But in web interface UNIT set to "M".

Please help.

Arduino 1.6.0
LIbrary 1.4.1
Vera lite UI5

Thank you!

Do I need to update json, xml and luup files in Vera when upgrading MySensors 1.3->1.4?

Thanks!

Hi!
I want to make all in one sensor node with motion, light, temperature and humidity sensors.
My question is about sleep mode. I need to wake up arduino by interrupt from motion sensor OR by timer in order to read temperature and humidity levels.
How can I do two interrupt power up modes together in mysensors?

Thanks!

Thank you for the ideas!

Hi. How about support for 433 mhz remotes and wall sockets?
I see Wireless Transmitter and Receiver Link Kit Module 433Mhz in your store. Do you have examples how to integrate radio sockets and remotes in vera? What kind of devices in vera interface i need to do it?
I know how to interact with my remote and sockets (with arduino rcswitch library), but how it will be in vera?

Thanks!