In my case, the most important things for a successful communication are:

1. A good 3.3V power source (I used an adapter for nrf24l01 + with AMS1117);
2. A 10uF capacitor (very important). In my case a 4.7uF capacitor was sufficient to pilot the nrf24l01 + PA + LNA at RF24_PA_LOW level.

Hi all,
I have been using an MQTT gateway on a RaspberryPi3 for a couple of years, but would like to migrate Openhab to a x64 mini PC.
I would like to know if it is possible to implement a gateway on Linux using a USB stick with an NRF24L01 on board like these:

• https://it.aliexpress.com/item/32818851812.html?spm=a2g0o.productlist.0.0.5ce8740c426GQc&algo_pvid=1cded951-a37f-46b7-848f-f0ebda40ccc2&algo_exp_id=1cded951-a37f-46b7-848f-f0ebda40ccc2-17&pdp_ext_f={"sku_id"%3A"64665767317"}
• https://it.aliexpress.com/item/1005001315121754.html?spm=a2g0o.productlist.0.0.5ce8740c426GQc&algo_pvid=1cded951-a37f-46b7-848f-f0ebda40ccc2&algo_exp_id=1cded951-a37f-46b7-848f-f0ebda40ccc2-43&pdp_ext_f={"sku_id"%3A"12000015666974002"}

Thanks and regards

In my case, the most important things for a successful communication are:

1. A good 3.3V power source (I used an adapter for nrf24l01 + with AMS1117);
2. A 10uF capacitor (very important). In my case a 4.7uF capacitor was sufficient to pilot the nrf24l01 + PA + LNA at RF24_PA_LOW level.