@sundberg84
there is no more log than: find parent
the serial writes no more.

i soldered caps on both. node and sensor

is it possible to chance the wireless lan channel? maybe colissions with the my home lan(wirelesslan )
i tried out 50cm to 20m.... the same

no chance.... isn´t working caps are installed now. other radios are in use now.
the node writes:
.....Connected!
IP: 192.168.178.189
0;0;3;0;9;gateway started, id=0, parent=0, distance=0

and the child writes:

find parent

nothing more happens

@martinhjelmare
thanks a lot for your answer.
Yes i wired up the Node an the Gateway like the description here in the mysensors.org is shown.
So that means the gateway is OK. Great.
close to each other? means the wires? i took 20cm cables. The same like shown in the description here. And The Distance between
GW und Node are about 30 -50 cm ( at my table )
the only thing i didn´t do: I had NO capacitor. maybe its the problem. ( The Power cames via USB from PC ) over 3v3 Arduino Nano to the Radio.
I did not believe in the great impact without Capacitor.

thanks. I will try this at evening

Hi, sorry my bad english, i´m german.
I´ve a problem with my little project. I want to install a ESP8266Gateway ( ArduinoNano ) connected with a NRF24L01. I loaded the ESP8266Gateway Scatch on the Arduino and the Serial Monitor shows an IP, that i can ping from PC. The Next line shows: 0;0;3;0;0.... Gateway started. -> I think this is now working or not?

Next Step: I installed an Node. I tried to connect an DistanceSensor on the next Arduino. And Also i wired up an NRF24L01 to the Nano.
With the Arduino IDE i loaded up the NodeScatch for the DistanceSensor. - and the Serial consoles showes only: "find parent"
now it happens not more..... I checked all wires... loaded up the code a few times. always the same.
so please help. why does the gateway no receive data from the node?
I thing, i have Problems with the very easyest thing of this technique....

Please anyone there who can help me? Maybe troubleshooting tips? maybe only one parameter i dont set? I´m really new in playing with MySensors.....

thanks
STefan