Great !
I did clear eeprom on my nodes and now they show up with a new ID
What is the recommend solution to not have duplicate ID ? Why did my new node get an ID already used ?
Great !
I did clear eeprom on my nodes and now they show up with a new ID
What is the recommend solution to not have duplicate ID ? Why did my new node get an ID already used ?
@mfalkvidd Thanks for your help. MYScontroller seems to be able to replace the gateway assignement. I was running it for troubleshooting and it assign ID that gateway already used.
So I created dummy ID in MYSController to ensure that node does not use the first one
@mfalkvidd Thanks for your help. MYScontroller seems to be able to replace the gateway assignement. I was running it for troubleshooting and it assign ID that gateway already used.
So I created dummy ID in MYSController to ensure that node does not use the first one
Great !
I did clear eeprom on my nodes and now they show up with a new ID
What is the recommend solution to not have duplicate ID ? Why did my new node get an ID already used ?
Hi mfalkvidd
I am using GatewayESP8266 for the gateway. Tested on a NodeMCU 0.9 and NodeMCU1.0
I am using the default RelayActuator that is contained in the devbranch.
I just uploaded to a 3rd Arduino the sketch. 2 shows up with ID 1 ... the 3rd show ID 100
Changed NRF24 antenna does not force the change of ID. re uploading the sketch to arduino does not reset ID in gateway
How to ask my arduino that show up with 1 to change to another number ?
Thanks
Hi All,
I did a lot of progress in my Mysensors project but I have a last issue.
I am using a Wifi Gateway with a Node MCU 1.0 but all my node show a one meaning that all my nodes seems to show up with the same node ID.
I am using Arduino IDE 1.6.8, tested with 1.6.5 and 1.611 same results
Using Board Manager ESP8266 2.3.0, tested with 2.0 and 2.1 with same results
MySController for first node
11/09/2016 11:59:04 RX 1;2;1;0;16;1
11/09/2016 11:59:11 NODE New node discovered, node id=1
11/09/2016 11:59:11 CHILD New child discovered, node id=1, child id=internal
11/09/2016 11:59:11 DEBUG Update child id=255, type=ARDUINO_NODE
11/09/2016 11:59:11 RX 1;255;0;0;17;2.0.0-beta
11/09/2016 11:59:11 TX 1;255;3;0;6;M
11/09/2016 11:59:11 RX 1;255;3;0;6;0
11/09/2016 11:59:12 RX 1;255;3;0;11;Binary Sensor and Sleep
11/09/2016 11:59:12 RX 1;255;3;0;12;1.0
11/09/2016 11:59:12 CHILD New child discovered, node id=1, child id=2
11/09/2016 11:59:12 DEBUG Update child id=2, type=DOOR
11/09/2016 11:59:12 RX 1;2;0;0;0;
11/09/2016 11:59:12 CHILD New child discovered, node id=1, child id=3
11/09/2016 11:59:12 DEBUG Update child id=3, type=DOOR
11/09/2016 11:59:12 RX 1;3;0;0;0;
11/09/2016 11:59:12 CHILD New child discovered, node id=1, child id=4
11/09/2016 11:59:12 DEBUG Update child id=4, type=CUSTOM
11/09/2016 11:59:12 RX 1;4;0;0;23;
11/09/2016 11:59:12 RX 1;2;1;0;16;1
Second Node
11/09/2016 12:03:12 DEBUG Update child id=255, type=ARDUINO_RELAY
11/09/2016 12:03:12 RX 1;255;0;0;18;2.0.0
11/09/2016 12:03:12 TX 1;255;3;0;6;M
11/09/2016 12:03:12 RX 1;255;3;0;6;0
11/09/2016 12:03:12 RX 1;255;3;0;11;Relay
11/09/2016 12:03:12 RX 1;255;3;0;12;1.0
11/09/2016 12:03:12 CHILD New child discovered, node id=1, child id=1
11/09/2016 12:03:12 DEBUG Update child id=1, type=LIGHT
11/09/2016 12:03:12 RX 1;1;0;0;3;
How to ensure that each node show as different node in the Gateway ?
I have tested with 2.0 MySensors Main banche and with 2.0.1 Beta and have the same results.
Many thanks for your help