I've set up esp8266 gateway and it works with my one sensor node (just 4 switches). Both are running 1.6beta dev branch.

I just bought Vera Edge (latest firmware) and installed the plugin. The plugin shows up fine and says it's connected (I gave it esp's ip)

The issue is that I can't get the sensor node to connect. According to the doc I have to start inclusion mode and restart the sensor.

That is what I do and here is the log of Vera connecting, me clicking START on plugin inclusion mode and then restarting the sensor.

0;0;3;0;9;Client 0 connected
                                                   
0;0;3;0;9;Client 0: 0;0;3;0;2;Get Version
                                      
0;0;3;0;9;Client 0: 
                                                           
0;0;3;0;9;Client 0: 0;0;3;0;5;1
                                                
0;0;3;0;9;Client 0: 
                                                           
0;0;3;0;9;read: 1-1-0 s=255,c=0,t=17,pt=0,l=10,sg=0:1.6.0-beta
                 
0;0;3;0;9;read: 1-1-0 s=255,c=3,t=6,pt=1,l=1,sg=0:0
                            
0;0;3;0;9;read: 1-1-0 s=3,c=0,t=0,pt=0,l=0,sg=0:
                               
0;0;3;0;9;read: 1-1-0 s=4,c=0,t=0,pt=0,l=0,sg=0:
                               
0;0;3;0;9;read: 1-1-0 s=5,c=0,t=0,pt=0,l=0,sg=0:
                               
0;0;3;0;9;read: 1-1-0 s=6,c=0,t=0,pt=0,l=0,sg=0:
                               
0;0;3;0;9;read: 1-1-0 s=3,c=1,t=16,pt=2,l=2,sg=0:0
                             
0;0;3;0;9;read: 1-1-0 s=5,c=1,t=16,pt=2,l=2,sg=0:0

After this is done nothing changes on vera, there's still just mysensors device and no new devices.

I know Vera works because it picked up all of my ecobee3 sensors just fine.

Any idea as to what could be the problem?

Thank you!

Looks like I might have jumped the gun on dev being better than release branch. I changed the keepalive timeout to a long time and constant reboots stopped.

So this is the same issue then, it might just get exacerbated when node has something to say to the gateway/controller.

By removed sensor I meant I turned it off completely (it is the only sensor node in the network). Gateway was still rebooting even with no nodes on the network.

I took apart my ethernet gateway so I think I'll just stick with this one and set keepalive to a long time. Gateway will still reboot but it won't be every minute and that should be ok until the fix is found.

Other than login/password and commenting out static ip part nothing was changed.
I wonder if it's power even though I'm powering from one of those breadboard power sources that's connected to 9v and is feeding 3.3v to esp/radio.

Removed the sensor completely and gateway still reboots, it just takes much longer now

0;0;3;0;9;Starting gateway (1.6.0-beta)
0;0;3;0;9;Radio init successful.
scandone
f 0, ....scandone
.add 0
aid 1
pm open phy_2,type:2 0 0
cnt 

connected with vhome, channel 6
dhcp client start...
..ip:192.168.0.51,mask:255.255.255.0,gw:192.168.0.1
.IP: 192.168.0.51
0;0;3;0;9;Init complete, id=0, parent=0, distance=0
0;0;3;0;9;Client 0 connected
0;0;3;0;9;Client 0: 0;255;3;0;2;
Fatal exception (28):
epc1=0x4000bf80, epc2=0x00000000, epc3=0x00000000, excvaddr=0x00000000, depc=0x00000000

Exception (28):
epc1=0x4000bf80 epc2=0x00000000 epc3=0x00000000 excvaddr=0x00000000 depc=0x00000000

ctx: cont 
sp: 3ffea5f0 end: 3ffea8a0 offset: 01a0

>>>stack>>>
3ffea790:  3fff1c28 40219388 3ffea980 402039e4  
3ffea7a0:  402136a9 3fff4b68 3ffeaa58 3ffea7d0  
3ffea7b0:  3ffea7c0 00000004 3ffeabf4 00000000  
3ffea7c0:  00000003 00000000 00000001 00000000  
3ffea7d0:  3ffeaa60 3ffeaa6c 0000000a 3ffeaac0  
3ffea7e0:  00000001 3ffeab90 00000000 40203ec8  
3ffea7f0:  00000000 3ffeaa60 3fff4bb8 40206a0a  
3ffea800:  3fffdc20 00000000 3ffeaa50 3ffeabf3  
3ffea810:  00000000 00000003 00000000 4020428b  
3ffea820:  3ffe8f20 00000000 000003e8 402024f1  
3ffea830:  00000000 3fff4bb8 3ffea950 3ffea860  
3ffea840:  00000000 00000004 3ffea950 40202d34  
3ffea850:  3fffdc20 00000000 00000000 3ffeaa58  
3ffea860:  3fffdc20 00000000 3ffeaa50 40204994  
3ffea870:  40203be9 00000000 3ffeaa50 402042e3  
3ffea880:  00000000 00000000 3ffeaa50 402048e6  
3ffea890:  00000000 00000000 3ffe9880 40100118  
<<<stack<<<
òm+ÿP9<áÿ0;0;3;0;9;Starting gateway (1.6.0-beta)
0;0;3;0;9;Radio init successful.
scandone
f 0, ....scandone
.reconnect
f -240, ....scandone
.reconnect
f 0, ....scandone
.add 0
aid 1
pm open phy_2,type:2 0 0
cnt 

connected with vhome, channel 6
dhcp client start...
..ip:192.168.0.51,mask:255.255.255.0,gw:192.168.0.1
.IP: 192.168.0.51
0;0;3;0;9;Init complete, id=0, parent=0, distance=0

Very sorry, I got past that point but forgot about it. I ended up having to remove all of the libraries and then extract dev branch, otherwise merging the two didn't work.

I think this issue is now gone, I can keep controller running and the gateway doesn't reboot. I do have a new issue though, sensors now crash the controller (was not the case in 1.5)

I just used a simple trigger example from dev branch and that crashes the gateway in some scenarios. It crashed it when I turned off the sensor node, it crashed when I opened serial monitor for sensor node, it crashes mid way, etc

Seems like any client communication has a high chance to crash it.

âm+ÿ¡šóÿ0;0;3;0;9;Starting gateway (1.6.0-beta)
                               
0;0;3;0;9;Radio init successful.
                                               
scandone
                                                                      
f 0, scandone
                                                                 
.add 0
                                                                        
aid 1
                                                                         
pm open phy_2,type:2 0 0
                                                      
cnt 
                                                                          
      
                                                                        
connected with vhome, channel 6
                                               
dhcp client start...
                                                          
.........ip:192.168.0.51,mask:255.255.255.0,gw:192.168.0.1
                    
.IP: 192.168.0.51
                                                             
0;0;3;0;9;Init complete, id=0, parent=0, distance=0
                            
0;0;3;0;9;Client 0 connected
                                                   
0;0;3;0;9;read: 20-20-0 s=255,c=0,t=17,pt=0,l=10,sg=0:1.6.0-beta
               
0;0;3;0;9;read: 20-20-0 s=255,c=3,t=6,pt=1,l=1,sg=0:0
                          
0;0;3;0;9;Client 0: 20;255;3;0;6;M
                                             
0;0;3;0;9;send: 0-0-20-20 s=255,c=3,t=6,pt=0,l=1,sg=0,st=ok:M
                  
0;0;3;0;9;read: 20-20-0 s=3,c=0,t=0,pt=0,l=0,sg=0:
                             
0;0;3;0;9;read: 20-20-0 s=3,c=1,t=16,pt=2,l=2,sg=0:1
                           
0;0;3;0;9;read: 20-20-0 s=3,c=1,t=16,pt=2,l=2,sg=0:0
                           
0;0;3;0;9;read: 20-20-0 s=3,c=1,t=16,pt=2,l=2,sg=0:1
                           
0;0;3;0;9;read: 20-20-0 s=3,c=1,t=16,pt=2,l=2,sg=0:0
                           
0;0;3;0;9;read: 20-20-0 s=3,c=1,t=16,pt=2,l=2,sg=0:1
                           
0;0;3;0;9;Client 0: 0;255;3;0;2;
                                               
Fatal exception (28):
                                                         
epc1=0x4000bf80, epc2=0x00000000, epc3=0x00000000, excvaddr=0x00000000, depc=0x0
0000000
                                                                       
         
                                                                     
Exception (28):
                                                               
epc1=0x4000bf80 epc2=0x00000000 epc3=0x00000000 excvaddr=0x00000000 depc=0x00000
000
                                                                           
     
                                                                         
ctx: cont 
                                                                    
sp: 3ffea5f0 end: 3ffea8a0 offset: 01a0
                                       
                                         
                                     
>>>stack>>>
                                                                   
3ffea790:  3fff1c88 40219430 3ffea980 402039e4  
                              
3ffea7a0:  40213751 3fff4b78 00000001 3ffea7d0  
                              
3ffea7b0:  3ffea7c0 00000004 3ffeabfc 00000000  
                              
3ffea7c0:  00000003 00000000 00000001 00000000  
                              
3ffea7d0:  3ffeaa68 3ffeaa74 0000000a 3ffeaac8  
                              
3ffea7e0:  00000001 3ffeab98 00000000 40203f34  
                              
3ffea7f0:  00000000 3ffeaa68 3ffeab98 40203624  
                              
3ffea800:  3fffdc20 00000000 3ffeaa58 3ffeabfb  
                              
3ffea810:  00000000 00000003 00000000 402042f3  
                              
3ffea820:  3ffea8cc 3ffea924 00000014 4020217e  
                              
3ffea830:  00000000 3fff4bc8 3ffea950 00000000  
                              
3ffea840:  00000010 00000000 00000014 00000002  
                              
3ffea850:  00000003 00000012 00000000 3ffeaa60  
                              
3ffea860:  3fffdc20 00000000 3ffeaa58 40204a1c  
                              
3ffea870:  40203c55 00000000 3ffeaa58 4020435f  
                              
3ffea880:  00000000 00000000 3ffeaa58 4020496a  
                              
3ffea890:  00000000 00000000 3ffe9880 40100118  
                              
<<<stack<<<
                                                                    
òm+ÿ(æz=0;0;3;0;9;Starting gateway (1.6.0-beta)
                                
0;0;3;0;9;Radio init successful.
                                               
scandone
                                                                      
f 0, scandone
                                                                 
.add 0
                                                                        
aid 1
                                                                         
pm open phy_2,type:2 0 0
                                                      
cnt 
                                                                          
      
                                                                        
connected with vhome, channel 6
                                               
dhcp client start...
                                                          
.........ip:192.168.0.51,mask:255.255.255.0,gw:192.168.0.1
                    
.IP: 192.168.0.51
                                                             
0;0;3;0;9;Init complete, id=0, parent=0, distance=0

Can't get dev branch to build -

GatewayESP8266.ino:131:27: fatal error: ESP8266WiFi.h: No such file or directory

On further inspection it looks like a different issue since I don't get reboots unless connected to Mycontroller. If I shut down the software reboots stop. Sensors send things to the gateway just fine.

If I set keepalive to very long then things are good and there are no reboots all the time(assuming it will reboot once that timer lapses). If I start mycontroller while esp is running then esp will reboot for sure.

This has something to do with tcp sockets and keepalive.

It does look like the same issue. Mine does not restart on a sensor connection (I have one node with 4 reed switches) but totally restarts on keepalive call.

Hey guys, I've set up esp8266 gateway and one of the opensource controllers. esp8266 keeps restarting with the errors below. If I disable the controller then esp seems to work fine.
The software has keepalive set and I believe that might be triggering this error. Has anyone seen anything like that?

Thanks.

ESP8266 MySensors Gateway
Connecting to vhome
.......Connected!
IP: 192.168.0.51
0;0;3;0;9;gateway started, id=0, parent=0, distance=0
Client 0 connected
0;0;3;0;14;Gateway startup complete.
Client 0: 0;255;3;0;2;

Exception (28):
epc1=0x4000bf80 epc2=0x00000000 epc3=0x00000000 excvaddr=0x00000000 depc=0x00000000

ctx: cont 
sp: 3ffeaca0 end: 3ffeaf20 offset: 01a0

>>>stack>>>
3ffeae40:  00000000 3fffdc20 3ffe97c7 40203ac0  
3ffeae50:  3ffeaf80 00000001 3ffe8fc9 4020b73c  
3ffeae60:  3ffeaf80 0000000b 3ffe98bf 00000000  
3ffeae70:  00000003 00000000 3ffe98a8 4020ae11  
3ffeae80:  00000001 3ffe98b4 3ffeaf80 4020ae11  
3ffeae90:  3ffe98b4 3ffe98b4 3ffeaf80 3ffeaf80  
3ffeaea0:  3ffe98b4 3ffe97c0 3ffe97c7 402024b4  
3ffeaeb0:  3ffe9ab8 3ffe98b4 00000000 40202784  
3ffeaec0:  3ffe8e48 00000000 000003e8 3ffe9c4c  
3ffeaed0:  00000000 3fff4c88 3fff4c18 3ffeaf4c  
3ffeaee0:  00000000 0000000a 00000000 00000000  
3ffeaef0:  40201c35 3300a8c0 00000000 3ffeaf4c  
3ffeaf00:  3fffdc20 00000000 3ffeaf44 40201c92  
3ffeaf10:  00000000 00000000 3ffe9f00 40100378  
<<<stack<<<

 ets Jan  8 2013,rst cause:1, boot mode:(3,7)

load 0x4010f000, len 1264, room 16 
tail 0
chksum 0x42
csum 0x42
~ld


ESP8266 MySensors Gateway
Connecting to vhome
.....Connected!
IP: 192.168.0.51
0;0;3;0;9;gateway started, id=0, parent=0, distance=0