@Oitzu A BIG THANK YOU, it work now with the foil trick. I'll will maybe close other forum topics including your topic's url. thank you again
wico2002
@wico2002
Best posts made by wico2002
Latest posts made by wico2002
-
RE: [SOLVED] 2 X nrf24l01+pa+lna with RF24_PA_MAX
-
RE: [SOLVED] 2 X nrf24l01+pa+lna with RF24_PA_MAX
@Oitzu questions: on the picture, the foil cover up the base of the antenna. Can it touch the antenna connector itself (golden part the antenna is screw on) or this part also need to be covered with plastic film ?
You also told you will try to cover up the inside of the case with foil to not wrap the radio itself... did you try it ?
-
RE: nRF24L01+PA+LNA
Thank you for this link.
I will reply in that topic to continue the same subject.
-
RE: nRF24L01+PA+LNA
@Oitzu I try running it at a lower PA level, set in the code, don't know if it helped or not. I also found if I keep the antenna straight (my antenna plug is pointing on the side, so let say 0 degrees) or at 90 degrees no data is sent but if it is fold at 45 degree the data seems to be sent good even if I don't touch the radio (but still don't know if I got a good range or not). seems to work better without the antenna plugged in ...
i'll try your trick
-
RE: nRF24L01+PA+LNA
Hi, i have the same problem. Bought a pa+lna radio with black antenna and only work if i touch the antenna or the radio's pcb, else the data if not sent at all. i added only a 200uf capacitor. Even with the breadboard power supply, to have a separate 3.3v it dont work. My basic nrf24l01+ is working well (except the range) but not the pre amplified one.
Any one have ideas ?