WaterMeterPulseSensor not showing up in HA UI
-
HA docker on rpi 0.95.4
I have a dozen of mysensors sensors already running just fine via nrf24 gw + mqtt
But I have trouble adding this one water meter pulse sensor.
https://www.mysensors.org/build/pulse_water
It shows up in mysensors.json and ha logs but fails to appear in states and GUI.
I think the problem is the default sketch does not send an initial value to gw, but I lack knowledge modifying it properly.
Thank you for your help -
HA docker on rpi 0.95.4
I have a dozen of mysensors sensors already running just fine via nrf24 gw + mqtt
But I have trouble adding this one water meter pulse sensor.
https://www.mysensors.org/build/pulse_water
It shows up in mysensors.json and ha logs but fails to appear in states and GUI.
I think the problem is the default sketch does not send an initial value to gw, but I lack knowledge modifying it properly.
Thank you for your help -
Hello! Can you solve it? I have the same problem.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login