💬 Open Close sensor + shock and magnetic field sensors.

[openhardware.io]

https://www.openhardware.io/view/765/Open-Close-sensor-shock-and-magnetic-field-sensors

[Puneit Thukral]

Hi, I complied your code for NRF51822 chip but I am getting the following errors at compile

Arduino: 1.8.11 (Mac OS X), Board: "MyBoardNRF5 nRF51822, 16 kB RAM, 256 kB flash (xxaa), None, Crystal Oscillator"

WARNING: library LIS2DW12-master claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on nRF5 architecture(s).
/Users/puneit/Google Drive/MySensor/NRF51822/doorsensor/doorsensor.ino: In function 'void board_Init()':
doorsensor:417:3: error: 'NRF_NFCT' was not declared in this scope
   NRF_NFCT->TASKS_DISABLE = 1;

   ^
doorsensor:419:13: error: 'struct NRF_UICR_Type' has no member named 'NFCPINS'
   NRF_UICR->NFCPINS = 0;

             ^
doorsensor:421:3: error: 'NRF_SAADC' was not declared in this scope
   NRF_SAADC ->ENABLE = 0;

   ^
doorsensor:422:3: error: 'NRF_PWM0' was not declared in this scope
   NRF_PWM0  ->ENABLE = 0;

   ^
doorsensor:423:3: error: 'NRF_PWM1' was not declared in this scope
   NRF_PWM1  ->ENABLE = 0;

   ^
doorsensor:424:3: error: 'NRF_PWM2' was not declared in this scope
   NRF_PWM2  ->ENABLE = 0;

   ^
doorsensor:425:3: error: 'NRF_TWIM1' was not declared in this scope
   NRF_TWIM1 ->ENABLE = 0;

   ^
doorsensor:426:3: error: 'NRF_TWIS1' was not declared in this scope
   NRF_TWIS1 ->ENABLE = 0;

   ^
Multiple libraries were found for "Wire.h"
 Used: /Users/puneit/Library/Arduino15/packages/sandeepmistry/hardware/nRF5/0.6.0/libraries/Wire
 Not used: /Users/puneit/Documents/Arduino/libraries/Wire
Multiple libraries were found for "SPI.h"
 Used: /Users/puneit/Library/Arduino15/packages/sandeepmistry/hardware/nRF5/0.6.0/libraries/SPI
 Not used: /Users/puneit/Documents/Arduino/libraries/SPI
exit status 1
'NRF_NFCT' was not declared in this scope
Invalid library found in /Users/puneit/Documents/Arduino/libraries/ESP8266SdFat: no headers files (.h) found in /Users/puneit/Documents/Arduino/libraries/ESP8266SdFat
Invalid library found in /Users/puneit/Documents/Arduino/libraries/SoftwareSerial: no headers files (.h) found in /Users/puneit/Documents/Arduino/libraries/SoftwareSerial
Invalid library found in /Users/puneit/Documents/Arduino/libraries/ArduinoHwNRF5-master: no headers files (.h) found in /Users/puneit/Documents/Arduino/libraries/ArduinoHwNRF5-master
Invalid library found in /Users/puneit/Documents/Arduino/libraries/arduino-nRF5-master: no headers files (.h) found in /Users/puneit/Documents/Arduino/libraries/arduino-nRF5-master
Invalid library found in /Users/puneit/Documents/Arduino/libraries/ArduinoBoards-master: no headers files (.h) found in /Users/puneit/Documents/Arduino/libraries/ArduinoBoards-master

This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.