MQTT gateway - Openhab & Mosquitto
-
Hi guys, I am running 1.4 version of mqtt gateway with some sensors.
What I found that in my case if I subscribe to MQTT gateway directly using mosquitto ( to check sensors communication ) , it will disconnect OpenHab client and will never reconnect until I restart Openhab mqtt bundle or the gateway. I wonder if there any workaround to this .. or is it maybe possible to somehow subscribe to mqtt using mosquitto and forward these under different topic to openhab ? That would make it easier instead of configuring 2 different brokers in Openhab.
Appreciate any suggestions..... -
set the mysensor gw to connect to mosquito, then Openhab to Mosquito
-
Do you know what would I need to configure for this to work automatically ?
Does mosquitto automatically re publish topics its subscribed to ?@alexeinz figured it out, apparently had to add experimental and get latest mosquitto for the conf file to work correctly , now the bridge is working perfectly :+1:
--- broker.conf file in /etc/mosquitto/conf.d
the topics coming from gw will appear under sensor/# on mosquittoconnection MMQTTtoSensor
address 192.168.1.234 <-gw ip
clientid MyMQTT
cleansession true
notifications true
topic # in 2 sensor/ MyMQTT/
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login