Setup problem

[Skysurfer14]

Hi there,

I have MyController running on RASPI with NRF24 Serial Module. This seems to work correct. Now I try to add a sensor to the system. I have tried several scripts from the MySensors Library. On the debug interface of the sensor I get this:

 __  __       ____
|  \/  |_   _/ ___|  ___ _ __  ___  ___  _ __ ___
| |\/| | | | \___ \ / _ \ `_ \/ __|/ _ \| `__/ __|
| |  | | |_| |___| |  __/ | | \__ \  _  | |  \__ \
|_|  |_|\__, |____/ \___|_| |_|___/\___/|_|  |___/
        |___/                      2.3.2

16 MCO:BGN:INIT NODE,CP=RNNNA---,FQ=8,REL=255,VER=2.3.2
28 TSM:INIT
28 TSF:WUR:MS=0
36 TSM:INIT:TSP OK
38 TSF:SID:OK,ID=100
40 TSM:FPAR
45 ?TSF:MSG:SEND,100-100-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
2054 !TSM:FPAR:NO REPLY
2056 TSM:FPAR
2060 ?TSF:MSG:SEND,100-100-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
4069 !TSM:FPAR:NO REPLY
4071 TSM:FPAR
4075 ?TSF:MSG:SEND,100-100-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
6084 !TSM:FPAR:NO REPLY
6086 TSM:FPAR
6090 ?TSF:MSG:SEND,100-100-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
8099 !TSM:FPAR:FAIL
8101 TSM:FAIL:CNT=1
8103 TSM:FAIL:DIS
8105 TSF:TDI:TSL

On MyController the gateway-setup is as follows:

Is it correct, that I can connect a sensor to the gateway without node? Or can I use a sensor as a node, too?

[skywatch]

@Skysurfer14 I am not totally sure what you have done, so this might help you get more help.

1. The sensor is connected to what?
2. Post the gateway code so we can see what is happening there.
3. Your debug shows that the node cannot find the parent (gateway) and therefore fails. Again, how it is all connected (drawing, photo) would help.