LoRa Gpio serial gateway
-
Hi!
I am trying to set up a lora gateway, and i found a BIG inconvenience. Cannot be used via GPIO serial ports?!¿
Hardware:
-Raspberry pi 3b
-Arduino pro mini 3.3v
-Ra-01 (Ai-Thinker)Comment:
LoRa node already tested.Gateway only works if i manually reset the arduino at the time Hass opens the serial port.
IMPORTANT NOTE:
This is normal beheaviour for arduinos with USB-Serial conversor included.I can try to copy the beheaviour using DTR pin on FT232, but simply don't knoww a way to copy the beheaviour using GPIO serial ports.
Seems Hass waits for MySensors gateway boot message, but gateway is already up since time.
But everithing works well i push reset button on message: "INFO (MainThread) [mysensors] Connected to Serial<..."
So.
Is there any way out?
-
i havent tested lora on serial gateway but i had issues using 3.3v arduino, for me fix was 5v arduino with logic converter.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login