AM312 with no delay
-
Hi! I bought five AM312 PIR-sensors but just realized that there is a delay from motion until action. Is there a similar PIR (same specification and size) but with no delay?
I would like to trigger the output as fast as possible when motion is detected.
Best regards
Halipte
-
@halipte The microwave 'radar' modules seem to trigger pretty fast - With PIR it depends a lot on ambient temperature of the area the pir is 'looking' at and the temperature of the moving object.
-
@halipte
Hi, have you tried these ones? HC-SR501 PIR
For me they work faster than the AS312.For the AS312 I use this one:
Wemos PIR shield
-
@virtualmkr Hi, thanks! I haven´t tried that one. How much faster (approx) are they? If possible I would like to trigger the output immediately there is movement.
Regarding the Wemos PIR shield, how do you mean you use it? Together with the AM312?
Best regards
Halipte
-
@halipte Yes, you are right. The AM312 is different from the AS312 which I use.
see: AM312 Datasheet and AS312 Datasheet
But both are looking similar. No additional parts are required. For the HC-SR501 PIR there are a lot of additional parts on the module PCB. So at the end I prefer the AS312 to keep my PIR sensor device small and simple.
Suggested Topics
-
Over the air updates
General Discussion • 23 Mar 2014, 21:38 • ToSa 1 Mar 2015, 11:21 -
Best VOC sensor for detecting a wide range of VOC's?
Hardware • 26 Oct 2023, 23:59 • NeverDie 18 Nov 2023, 01:41 -
Does MySensors require Arduino Timer 2?
Hardware • 6 Jan 2024, 19:39 • OldSurferDude 11 Jan 2024, 04:39 -
Sensor to detect marijuana vape/smoke
Hardware • 21 Jan 2025, 06:36 • Hellmark 25 Feb 2025, 20:56 -
Sleep mode for bmp280
Hardware • 20 Feb 2018, 13:24 • fishermans 5 Feb 2024, 18:30 -
Newbie questions
Hardware • 14 Feb 2025, 20:03 • magwas 14 Feb 2025, 20:03