Trying to automate in Domoticz

[Feliw05]

Hello everyone, I just started with mysensors, I have successfully connected a serial gateway and a node that measures temperature. I'm now trying to automate on domoticz so that I can get notifications and other things of my node. I am trying to learn dzVents in the domoticz wiki:(https://www.domoticz.com/wiki/DzVents:_next_generation_Lua_scripting)
The problem is that When I save and run the Quickstart code with the name of my switch the log only shows that it has been turn on and doesnt show my log message.
return {
on = {
devices = {
'switch'
}
},
execute = function(domoticz, switch)
if (switch.state == 'On') then
domoticz.log('Hey! I am on!')
else
domoticz.log('Hey! I am off!')
end
end
}
}

I have already set the local network to 127.0.0.1 and enabled dzVents.
Does anyone now what is happening?

[boum]

First, make sure your switch is really named 'switch', the scripts are case sensitive, so neither 'Switch' nor 'SWITCH' will work. Also, verify you don't have a trailing space in the name ('switch ').
To check your script is run when the device is changed, add a domoticz.log first line in the execute function.
Hope this helps.

[Feliw05]

@boum sadly it didnt work :( I made sure that the name of the switch was well written and I added a domoticz.log with a message inside the function and it didnt work.

[MHofer]

the problem is "if (switch.state == 'On') then" that not works, write:

if (switch.active) then

or

if (switch.inActive) then

Device attributes and methods for all devices