Error decoding message from gateway, bad data received
-
Hello,
I have a problem with MySensors and HomeAssistant. I added a sketch that supports relays on Arduino Mega. Everything worked very well. Then after changing the USB port, it started reporting warnings. Everything still works, but after each change of the state of the relay, there are more warnings in the logs.Warning 1:
Error decoding message from gateway, bad data received: Incoming change for sensor:1, New status: 1
Error decoding message from gateway, bad data received: Incoming change for sensor:1, New status: 0Warning 2:
Not a valid message: not enough values to unpack (expected 5, got 0)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login