💬 Building a WiFi Gateway using ESP8266

[maddhin]

Hi,
I would like to add sendSketchInfo to my gateway.
I added

const char* sketch_name = "GatewayESP8266OTA_v3";
const char* rev = "1.01";

at the beginning of the sketch and

sendSketchInfo(sketch_name, rev);

in the presentation part.

but this doesn't seem to work. Am I doing anything wrong? Any suggestion on how to do it right? Many thanks in advance!

[rejoe2]

Use this syntax instead:

#define SN "GatewayESP8266OTA_v3"
#define SV "1.01"

sendSketchInfo(SN, SV);

[billcrps32]

@Fat-Fly i also want the answer of this question

[Bogusz Jagoda]

Worth noting - use MY_RFM69_NEW_DRIVER define... (2.3.2+)

#ifdef ESP8266
    // For RFM69
    #define MY_RADIO_RFM69
	#define MY_RFM69_NEW_DRIVER
    #define MY_RFM69_FREQUENCY  RFM69_868MHZ // Set your frequency here
    #define MY_IS_RFM69HW                    // Omit if your RFM is not "H"
    #define MY_RFM69_IRQ_PIN    D1
    #define MY_RFM69_IRQ_NUM    digitalPinToInterrupt(MY_RFM69_IRQ_PIN)
    #define MY_RFM69_CS_PIN     D8           // NSS. Use MY_RFM69_SPI_CS for older versions (before 2.2.0)
#endif

[HoseArkadio]

Hi,
I'm having trouble compiling the ESP gate code. Can you help me?

In file included from c:\Users\Arkadiusz_Dziura\Documents\Arduino\libraries\MySensors/MySensors.h:441,
from C:\Users\Arkadiusz_Dziura\Documents\Arduino_OLD\Domoticz_BRAMA_ESP\Domoticz_BRAMA_ESP.ino:61:
c:\Users\Arkadiusz_Dziura\Documents\Arduino\libraries\MySensors/hal/architecture/ESP8266/MyMainESP8266.cpp: In function 'bool can_yield()':
c:\Users\Arkadiusz_Dziura\Documents\Arduino\libraries\MySensors/hal/architecture/ESP8266/MyMainESP8266.cpp:95:9: error: 'cont_can_yield' was not declared in this scope; did you mean 'can_yield'?
95 | return cont_can_yield(g_pcont);
| ^~~~~~~~~~~~~~
| can_yield
c:\Users\Arkadiusz_Dziura\Documents\Arduino\libraries\MySensors/hal/architecture/ESP8266/MyMainESP8266.cpp: In function 'void esp_yield_within_cont()':
c:\Users\Arkadiusz_Dziura\Documents\Arduino\libraries\MySensors/hal/architecture/ESP8266/MyMainESP8266.cpp:101:2: error: 'cont_yield' was not declared in this scope; did you mean 'can_yield'?
101 | cont_yield(g_pcont);
| ^~~~~~~~~~
| can_yield
c:\Users\Arkadiusz_Dziura\Documents\Arduino\libraries\MySensors/hal/architecture/ESP8266/MyMainESP8266.cpp: In function 'void loop_task(ETSEvent*)':
c:\Users\Arkadiusz_Dziura\Documents\Arduino\libraries\MySensors/hal/architecture/ESP8266/MyMainESP8266.cpp:199:26: error: invalid operands of types 'void' and 'int' to binary 'operator!='
199 | if (cont_check(g_pcont) != 0) {
| ~~~~~~~~~~~~~~~~~~~ ^~ ~
| | |
| void int

exit status 1

Compilation error: exit status 1

[veris25]

I join the question, I have exactly the same problem: .../MyMainESP8266.cpp:95:9: error: 'cont_can_yield' was not declared in this scope; did you mean 'can_yield'?
i found a reference #include "cont.h" in MyMainESP8266.cpp but i can't find 'cont.h'

[Msmax]

@veris25
I installed an older ESP8266 lib v3.0.0 to compile without errors.

[electrik]

You should try downgrading the ESP version below 3.0

[HoseArkadio]

elektryk ....I do not really understand.

[electrik]

I mean the ESP framework version, selected by the board version
https://arduino.esp8266.com/Arduino/versions/2.0.0/doc/installing.html#:~:text=Open Boards Manager from Tools,from a drop-down box.