Help needed with connecting MySensors node to Home Assistant
-
Hello everyone,
I'm having some trouble getting a MySensors node to work with Home Assistant. Here are my accomplishments so far:
- I've built the node using an Arduino Nano and a NRF24L01+ radio module.
- I've uploaded the MySensors sketch to the Arduino Nano.
- I've connected the NRF24L01+ module to my Home Assistant server using a USB adapter.
However I don't see any devices when I try to add the node to Home Assistant. Although I've reset the node and looked through the logs, no issues are showing up. At this point, I'm not sure what else to attempt.
Has anyone else had a similar issue? Any tips on troubleshooting this problem would be greatly appreciated.
Thanks in advance!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login