Enclosure for Easy-Peasy-LEDsy nRF24 Serial Gateway
-
HI all,
I'm sharing a serial gateway I built, based on the Easy-Peasy Serial Gateway.
You can find the hardware on OpenHardware: Easy-Peasy-LEDsy MySensors NRF24 Serial Gateway. It is basically a D1 mini with a shield into which you connect an nRF24+PA+LNA module and the LEDs.

Here are the stl files:
GW_Case.stl
GW_Cover.stl
GW_Hold Down.stlIt has a snap on cover, ventilation, and a hold-down to fix the D1 mini.
-
Nice share — the hold-down for the D1 mini is a detail many cases skip. One thing I'd want to check before printing: the nRF24 PA+LNA modules are noticeably longer than the plain ones and usually have the antenna sticking out sideways or up, so does the cover leave room for that variant, or is the case sized for the standard module? If it's tight, a slot in the cover for the antenna might save someone a failed print.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login