[closed] Fail Code when Transmitting
-
Finally, i've success flash my arduino pro mini to run at 1MHz.
But somehow the message never come to gateway and when I debug, it said something like thesesensor started 1, id 1 send: 1-1-0-0 s=255,c=0,t=17,pt=0,l=5,st=fail:1.4.1 send: 1-1-0-0 s=255,c=3,t=6,pt=1,l=1,st=fail:0 send: 1-1-0-0 s=255,c=3,t=11,pt=0,l=21,st=fail:Basic-Sketch-MySensor send: 1-1-0-0 s=255,c=3,t=12,pt=0,l=3,st=fail:1.0 send: 1-1-0-0 s=255,c=3,t=0,pt=1,l=1,st=fail:100 Startup Finished send: 1-1-0-0 s=255,c=3,t=0,pt=1,l=1,st=fail:100What is that fail mean? Please help
btw, I have properly setup my nrf with arduino pro mini (cable, etc)Thanks
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login