Serial Gateway Board
-
Just some pics of my Serial gateway board. Making it tidy to live in the airing cupboard.
decided to add the led's but forgot the switch, will add it later
And with nano and rf board
Just need to print a nice box now.
Oh and are the led's meant to be on all the time and flash off? cos they do. And damn, those blue led's are bright. (didn't have a yellow), doubles as a light for the cupboard.
-
And this is what I thought for a box, tunnels for the led's to shine through the lid.
-
Well I just received a RF board with external antenna so my box hopefully will now look like this.
-
Finished and installed. Little bit of fickering to get it in, I forgot to take into account the big solder blobs on the bottom of the antenna connector.
The lights are more distinct than the photo shows, my phone obviously really likes red.
Now back to nodes :)
-
I can't disagree on the colour, but I couldn't be bothered changing out the filament that was loaded, it could have ended up not fitting and I would have wasted it. I may redo when I load up some white.
-
Mk 2 box in white ABS, the lights don't look like the picture they are more distinct.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login