Ethernet Gateway - Using an Arduino UNO
-
Hi
Wondering if anyone has used an UNO for the gateway? Does anything change? I am using the ENC28J60 and made the change as follows;
#include <UIPEthernet.h> // Use this if you have attached a Ethernet ENC28J60 shields
I also used the default IP address and programed it into the vera, am I missing something?
I changed from the serial gateway and that worked perfect, I wanted to use the UNO as I have more of them and I was told the Ethernet gateway worked better.Any help would be greatly appreciated.
T -
The error I get is as follows; and I am using U17 and NRF24L01. I have power to the UNO as well.
MySensors plugin : Cannot send command - communications error
ERROR : Error in lua for scenes and events Not sure if this is related to this or my calendar issue.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login