Power Meter Pulse Sensor : Help with example script?
-
Hi All, I'm using the example pulse power meter script...
http://www.mysensors.org/build/pulse_power
It's all running well but all I get when looking at the serial monitor is this...
sensor started, id 25
send: 25-25-0-0 s=255,c=0,t=17,pt=0,l=5,st=ok:1.4.1
send: 25-25-0-0 s=255,c=3,t=6,pt=1,l=1,st=ok:0
read: 0-0-25 s=255,c=3,t=6,pt=0,l=1:M
send: 25-25-0-0 s=255,c=3,t=11,pt=0,l=12,st=ok:Energy Meter
send: 25-25-0-0 s=255,c=3,t=12,pt=0,l=3,st=ok:1.0
send: 25-25-0-0 s=10,c=0,t=13,pt=0,l=5,st=ok:1.4.1
send: 25-25-0-0 s=10,c=2,t=24,pt=0,l=0,st=ok:
send: 25-25-0-0 s=10,c=2,t=24,pt=0,l=0,st=ok:
send: 25-25-0-0 s=10,c=2,t=24,pt=0,l=0,st=ok:
send: 25-25-0-0 s=10,c=2,t=24,pt=0,l=0,st=ok:
send: 25-25-0-0 s=10,c=2,t=24,pt=0,l=0,st=ok:I'm sending everything through the MQTT Gateway and all the sensor sends is a topic of "MyMQTT/25/10/V_VAR1" with no actual data.
From what I can tell the sensor tries to ask what was the last value it sent to the gateway which I think is what this topic is.... Should I be setting something extra up in the gateway?
Any help would be appreciated....
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login