nodered "injected" between domoticz and mysensors
-
a small example that I made, using my node-red-contrib-mysensors nodes (needs to be installed for this to work)
This routes data from a mysensors GW, to both domoticz and pidome. It filters out node-id request, so they are not sent to pidome (domoticz is the one that hands out id's to mysensors nodes).
I have a pulse counting arduino on my utility meter, this outputs strings as <watts>;<wh>\n, which I split into two different messages with a function, and dumps into mysensor serial protocol
To connect with domoticz / pidome, the following pipes are made with socat
socat PTY,link=/dev/ttyS80,mode=666,group=dialout,raw PTY,link=/dev/ttyUSB20,mode=666,group=dialout,raw & socat PTY,link=/dev/ttyS81,mode=666,group=dialout,raw PTY,link=/dev/ttyUSB21,mode=666,group=dialout,raw & socat PTY,link=/dev/ttyS82,mode=666,group=dialout,raw PTY,link=/dev/ttyUSB22,mode=666,group=dialout,raw &It makes 3 virtual serial ports that I can use to attach pidome etc. to domoticz. I put it in /etc/rc.local
domoticz is using /dev/ttyUSB20 as a mysensors serial GW.
[{"id":"acfe3226.5301d","type":"serial-port","serialport":"/dev/ttyACM0","serialbaud":"115200","databits":"8","parity":"none","stopbits":"1","newline":"\\n","bin":"false","out":"char","addchar":true},{"id":"66f437ac.990bc8","type":"serial-port","serialport":"/dev/ttyS81","serialbaud":"115200","databits":"8","parity":"none","stopbits":"1","newline":"\\n","bin":"false","out":"char","addchar":true},{"id":"b5105521.4aefa8","type":"serial-port","serialport":"/dev/ttyS80","serialbaud":"115200","databits":"8","parity":"none","stopbits":"1","newline":"\\n","bin":"false","out":"char","addchar":true},{"id":"821a7286.7de59","type":"serial-port","serialport":"/dev/ttyUSB0","serialbaud":"115200","databits":"8","parity":"none","stopbits":"1","newline":"\\n","bin":"false","out":"char","addchar":true},{"id":"5b8bba4c.a47444","type":"serial in","name":"From Mysensors","serial":"821a7286.7de59","x":257,"y":196,"z":"67deb464.98214c","wires":[["1656727d.e9a98e","4755dfb8.b8aa2"]]},{"id":"47b5936e.b84a6c","type":"serial out","name":"To Mysensors","serial":"821a7286.7de59","x":1166,"y":305,"z":"67deb464.98214c","wires":[]},{"id":"602db35f.9fd24c","type":"serial in","name":"From Domoticz","serial":"b5105521.4aefa8","x":248,"y":348,"z":"67deb464.98214c","wires":[["47b5936e.b84a6c","f58d12f9.0a72f"]]},{"id":"4755dfb8.b8aa2","type":"serial out","name":"To Domoticz","serial":"b5105521.4aefa8","x":1164,"y":213,"z":"67deb464.98214c","wires":[]},{"id":"1656727d.e9a98e","type":"mysdecenc","name":"","x":560,"y":157,"z":"67deb464.98214c","wires":[["5dbdeccd.a24214"]]},{"id":"3094c378.cf6b3c","type":"debug","name":"","active":true,"console":"false","complete":"true","x":1033,"y":468,"z":"67deb464.98214c","wires":[]},{"id":"5dbdeccd.a24214","type":"function","name":"Filter ID requests","func":"if (msg.messageType != 3 &\n msg.subType != 3) {\n return msg;\n}","outputs":1,"noerr":0,"x":738,"y":157,"z":"67deb464.98214c","wires":[["2ce8f789.d31708"]]},{"id":"293de58.fd6c21a","type":"serial in","name":"From PiDome","serial":"66f437ac.990bc8","x":246,"y":266,"z":"67deb464.98214c","wires":[["47b5936e.b84a6c","4755dfb8.b8aa2"]]},{"id":"f58d12f9.0a72f","type":"serial out","name":"To PiDome","serial":"66f437ac.990bc8","x":1162,"y":386,"z":"67deb464.98214c","wires":[]},{"id":"2ce8f789.d31708","type":"mysdecenc","name":"","x":915,"y":156,"z":"67deb464.98214c","wires":[["f58d12f9.0a72f"]]},{"id":"ff3ea1e4.00c16","type":"serial in","name":"Meter input","serial":"acfe3226.5301d","x":229,"y":475,"z":"67deb464.98214c","wires":[["3c7fe6d9.c3801a"]]},{"id":"3c7fe6d9.c3801a","type":"function","name":"Split meter data","func":"var pl = msg.payload.split(';');\n\nmsg1 = {payload : parseFloat(pl[0])*1000};\nmsg2 = {payload : parseFloat(pl[1])/1000};\nreturn [msg1, msg2];","outputs":"2","noerr":0,"x":427,"y":475,"z":"67deb464.98214c","wires":[["e1a7231a.1e58e"],["b06687e3.4f9978"]]},{"id":"e1a7231a.1e58e","type":"mysencap","name":"V_WATT node 99","nodeid":"99","childid":"1","subtype":"17","x":642,"y":445,"z":"67deb464.98214c","wires":[["ede87fe8.12178"]]},{"id":"b06687e3.4f9978","type":"mysencap","name":"V_KWM node 99","nodeid":"99","childid":"2","subtype":"18","x":640,"y":488,"z":"67deb464.98214c","wires":[["ede87fe8.12178"]]},{"id":"ede87fe8.12178","type":"mysdecenc","name":"","x":868,"y":468,"z":"67deb464.98214c","wires":[["3094c378.cf6b3c","4755dfb8.b8aa2","f58d12f9.0a72f"]]}]``` -
one word of caution, using the above scenario..
You need to have something picking up the "serial port data" in the other end of the socat pipes, otherwise nodered clog up, and start to use 100% cpu. I discovered that the "hard way".
As long as the socat pipe is emptied, node-red is running happily :)
-
just updated the plugin to node-red, so it now can send presentation messages as well (and internal messages, if you want), when using the "mysencap" node.
The presentation message is sent 1 second after a flow is deployed, or when node-red is started..
-
This looks really cool! What is PiDome's role in this picture?
-
It would just be a proof of concept. However I haven't succeeded in bringing in Pidome, as it relies on USB device descriptors for the serial port, and so I can't choose the socat pipe from nodered.
One could use it for testing new sensor types, mock them up in nodered and inject messages to the controller (pidome, domoticz etc)
-
Yep, that's correct, to make sure the correct interface is loaded (serial/hid/etc..). If you would get it to trigger udev with a serial description it should catch it.
Nonetheless in about a week or two, three i think the fixed udev triggered mechanism will be supplemented with an user selectable list of available ports as i'm quite interested in this mockup.
-
just made a small update, so it now can create a more full presentation round, to another controller, with both sketch name, and version strings..
Use the following to update your plugin..
npm update node-red-contrib-mysensors@tbowmo Thanks for the update. I hope to try using socat as a way to test different controllers easily. I am frustrated with the controller options and I feel like as my project progresses being able to easily change controllers might be very desirable. This architecture makes that possible.
I have a function in my node-red flow that enriches the messages from MySensors. I realize this begins to do what a controller might do, but I need a simple way to translate "Node:20, Child:1" to "Tank 1 - Water Temperature" so that I can publish that to a database or dweet.io or easily display in a graph. I might know what a graph of Node:20:Child1=25.6 means but nobody else will.
I am new to json but am attempting to use that. Ideally node-red would allow for easily manage this mapping information via a web page and store it. I am setting this globally:
[{"id":"d5d724ec.cba8c","type":"subflow","name":"On Startup","in":[],"out":[{"x":454,"y":160,"wires":[{"id":"dcd80855.bc4688","port":0}]}]},{"id":"c7328a87.d34f28","type":"inject","name":"On Startup","topic":"server-startup","payload":"","payloadType":"date","repeat":"","crontab":"","once":true,"x":148,"y":160,"z":"d5d724ec.cba8c","wires":[["dcd80855.bc4688"]]},{"id":"dcd80855.bc4688","type":"function","name":"Save startup date","func":"msg.startupDate = msg.payload;\nmsg.payload = \"\";\nreturn msg;","outputs":1,"noerr":0,"x":318,"y":160,"z":"d5d724ec.cba8c","wires":[[]]},{"id":"302ddf01.cbf0b8","type":"subflow:d5d724ec.cba8c","name":"","x":127,"y":214,"z":"5791498e.8d6878","wires":[["841c3e7c.b41288"]]},{"id":"841c3e7c.b41288","type":"function","name":"SetGlobalVars","func":"node.log(\"Add sensorNodes to global context\");\n\nvar sNodes = [ \n {nodeId:30, nodeLabel:\"Greenhouse\", \n sensors:[\n {childSensorId:1, childSensorLabel:\"Air\", sensorTypeLabel:\"Temperature\"},\n {childSensorId:2, childSensorLabel:\"Air\", sensorTypeLabel:\"Humidity\"},\n {childSensorId:130, childSensorLabel:\"AirBattery\", sensorTypeLabel:\"Voltage\"}\n ] \n }, \n {nodeId:50, nodeLabel:\"Aquaponics\", \n sensors:[\n {childSensorId:0, childSensorLabel:\"Water\", sensorTypeLabel:\"Temperature\"},\n {childSensorId:20, childSensorLabel:\"Air\", sensorTypeLabel:\"Humidity\"},\n {childSensorId:21, childSensorLabel:\"Air\", sensorTypeLabel:\"Temperature\"},\n {childSensorId:30, childSensorLabel:\"Light\", sensorTypeLabel:\"Lux\"}\n ]\n }\n ];\n\ncontext.global.sensorNodes = sNodes;\n\n \nmsg.payload = context.global.sensorNodes;\n\nreturn msg;","outputs":1,"noerr":0,"x":357,"y":213,"z":"5791498e.8d6878","wires":[[]]},{"id":"8ad9f121.3ea3b","type":"inject","name":"","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"x":127,"y":135,"z":"5791498e.8d6878","wires":[["841c3e7c.b41288"]]}]and then using it:
[{"id":"d14e00ff.cc9f7","type":"function","name":"MySensorIdInfo","func":"var sensorNode = getByNodeId(context.global.sensorNodes, \"\"+msg.nodeId);\nif (sensorNode != null) {\n console.log(\"NodeLabel = \" + sensorNode.nodeLabel);\n msg.nodeLabel = sensorNode.nodeLabel;\n \n var childNode = getByChildId(sensorNode.sensors, \"\"+msg.childSensorId);\n if (childNode != null) {\n console.log(\"ChildNodeLabel = \" + childNode.childSensorLabel);\n msg.childSensorLabel = childNode.childSensorLabel;\n msg.sensorTypeLabel = childNode.sensorTypeLabel;\n } else {\n msg.childSensorLabel = msg.childSensorId;\n msg.sensorTypeLabel = \"undefined\";\n }\n} else {\n node.error(\"No sensor match found in sensorNodes\");\n msg.nodeLabel = msg.nodeId;\n msg.childSensorLabel = msg.childSensorId;\n msg.sensorTypeLabel = \"undefined\"; \n}\n\nif (msg.sensorTypeLabel == \"undefined\") {\n return null;\n}\n\n//debug\nnode.log(\"nodeId = \" + msg.nodeId + \" :--: \" + \n\"nodeLabel = \" + msg.nodeLabel + \" :--: \" + \n\"childSensorId = \" + msg.childSensorId + \" :--: \" + \n\"childSensorLabel = \" + msg.childSensorLabel + \" :--: \" + \n\"sensorTypeLabel = \" + msg.sensorTypeLabel);\n\nreturn msg;\n\n//------- Helper Functions ----------//\n\nfunction getByNodeId(arr, value) {\n for (var i=0, iLen=arr.length; i<iLen; i++) {\n if (arr[i].nodeId == value) return arr[i];\n }\n}\n\nfunction getByChildId(arr, value) {\n for (var i=0, iLen=arr.length; i<iLen; i++) {\n if (arr[i].childSensorId == value) return arr[i];\n }\n}","outputs":1,"noerr":0,"x":614,"y":390,"z":"c3095d41.89f1e8","wires":[["6e57151f.370ffc","ae35a271.90c3b"]]}]The one other piece I added was a response to the MetricOrImperial question. Maybe some of this is useful. Thanks for your work.
-
@tbowmo Thanks for the update. I hope to try using socat as a way to test different controllers easily. I am frustrated with the controller options and I feel like as my project progresses being able to easily change controllers might be very desirable. This architecture makes that possible.
I have a function in my node-red flow that enriches the messages from MySensors. I realize this begins to do what a controller might do, but I need a simple way to translate "Node:20, Child:1" to "Tank 1 - Water Temperature" so that I can publish that to a database or dweet.io or easily display in a graph. I might know what a graph of Node:20:Child1=25.6 means but nobody else will.
I am new to json but am attempting to use that. Ideally node-red would allow for easily manage this mapping information via a web page and store it. I am setting this globally:
[{"id":"d5d724ec.cba8c","type":"subflow","name":"On Startup","in":[],"out":[{"x":454,"y":160,"wires":[{"id":"dcd80855.bc4688","port":0}]}]},{"id":"c7328a87.d34f28","type":"inject","name":"On Startup","topic":"server-startup","payload":"","payloadType":"date","repeat":"","crontab":"","once":true,"x":148,"y":160,"z":"d5d724ec.cba8c","wires":[["dcd80855.bc4688"]]},{"id":"dcd80855.bc4688","type":"function","name":"Save startup date","func":"msg.startupDate = msg.payload;\nmsg.payload = \"\";\nreturn msg;","outputs":1,"noerr":0,"x":318,"y":160,"z":"d5d724ec.cba8c","wires":[[]]},{"id":"302ddf01.cbf0b8","type":"subflow:d5d724ec.cba8c","name":"","x":127,"y":214,"z":"5791498e.8d6878","wires":[["841c3e7c.b41288"]]},{"id":"841c3e7c.b41288","type":"function","name":"SetGlobalVars","func":"node.log(\"Add sensorNodes to global context\");\n\nvar sNodes = [ \n {nodeId:30, nodeLabel:\"Greenhouse\", \n sensors:[\n {childSensorId:1, childSensorLabel:\"Air\", sensorTypeLabel:\"Temperature\"},\n {childSensorId:2, childSensorLabel:\"Air\", sensorTypeLabel:\"Humidity\"},\n {childSensorId:130, childSensorLabel:\"AirBattery\", sensorTypeLabel:\"Voltage\"}\n ] \n }, \n {nodeId:50, nodeLabel:\"Aquaponics\", \n sensors:[\n {childSensorId:0, childSensorLabel:\"Water\", sensorTypeLabel:\"Temperature\"},\n {childSensorId:20, childSensorLabel:\"Air\", sensorTypeLabel:\"Humidity\"},\n {childSensorId:21, childSensorLabel:\"Air\", sensorTypeLabel:\"Temperature\"},\n {childSensorId:30, childSensorLabel:\"Light\", sensorTypeLabel:\"Lux\"}\n ]\n }\n ];\n\ncontext.global.sensorNodes = sNodes;\n\n \nmsg.payload = context.global.sensorNodes;\n\nreturn msg;","outputs":1,"noerr":0,"x":357,"y":213,"z":"5791498e.8d6878","wires":[[]]},{"id":"8ad9f121.3ea3b","type":"inject","name":"","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"x":127,"y":135,"z":"5791498e.8d6878","wires":[["841c3e7c.b41288"]]}]and then using it:
[{"id":"d14e00ff.cc9f7","type":"function","name":"MySensorIdInfo","func":"var sensorNode = getByNodeId(context.global.sensorNodes, \"\"+msg.nodeId);\nif (sensorNode != null) {\n console.log(\"NodeLabel = \" + sensorNode.nodeLabel);\n msg.nodeLabel = sensorNode.nodeLabel;\n \n var childNode = getByChildId(sensorNode.sensors, \"\"+msg.childSensorId);\n if (childNode != null) {\n console.log(\"ChildNodeLabel = \" + childNode.childSensorLabel);\n msg.childSensorLabel = childNode.childSensorLabel;\n msg.sensorTypeLabel = childNode.sensorTypeLabel;\n } else {\n msg.childSensorLabel = msg.childSensorId;\n msg.sensorTypeLabel = \"undefined\";\n }\n} else {\n node.error(\"No sensor match found in sensorNodes\");\n msg.nodeLabel = msg.nodeId;\n msg.childSensorLabel = msg.childSensorId;\n msg.sensorTypeLabel = \"undefined\"; \n}\n\nif (msg.sensorTypeLabel == \"undefined\") {\n return null;\n}\n\n//debug\nnode.log(\"nodeId = \" + msg.nodeId + \" :--: \" + \n\"nodeLabel = \" + msg.nodeLabel + \" :--: \" + \n\"childSensorId = \" + msg.childSensorId + \" :--: \" + \n\"childSensorLabel = \" + msg.childSensorLabel + \" :--: \" + \n\"sensorTypeLabel = \" + msg.sensorTypeLabel);\n\nreturn msg;\n\n//------- Helper Functions ----------//\n\nfunction getByNodeId(arr, value) {\n for (var i=0, iLen=arr.length; i<iLen; i++) {\n if (arr[i].nodeId == value) return arr[i];\n }\n}\n\nfunction getByChildId(arr, value) {\n for (var i=0, iLen=arr.length; i<iLen; i++) {\n if (arr[i].childSensorId == value) return arr[i];\n }\n}","outputs":1,"noerr":0,"x":614,"y":390,"z":"c3095d41.89f1e8","wires":[["6e57151f.370ffc","ae35a271.90c3b"]]}]The one other piece I added was a response to the MetricOrImperial question. Maybe some of this is useful. Thanks for your work.
@bpair said:
@tbowmo Thanks for the update. I hope to try using socat as a way to test different controllers easily. I am frustrated with the controller options and I feel like as my project progresses being able to easily change controllers might be very desirable. This architecture makes that possible.
I have a function in my node-red flow that enriches the messages from MySensors. I realize this begins to do what a controller might do, but I need a simple way to translate "Node:20, Child:1" to "Tank 1 - Water Temperature" so that I can publish that to a database or dweet.io or easily display in a graph. I might know what a graph of Node:20:Child1=25.6 means but nobody else will.
I am new to json but am attempting to use that. Ideally node-red would allow for easily manage this mapping information via a web page and store it. I am setting this globally:
[{"id":"d5d724ec.cba8c","type":"subflow","name":"On Startup","in":[],"out":[{"x":454,"y":160,"wires":[{"id":"dcd80855.bc4688","port":0}]}]},{"id":"c7328a87.d34f28","type":"inject","name":"On Startup","topic":"server-startup","payload":"","payloadType":"date","repeat":"","crontab":"","once":true,"x":148,"y":160,"z":"d5d724ec.cba8c","wires":[["dcd80855.bc4688"]]},{"id":"dcd80855.bc4688","type":"function","name":"Save startup date","func":"msg.startupDate = msg.payload;\nmsg.payload = \"\";\nreturn msg;","outputs":1,"noerr":0,"x":318,"y":160,"z":"d5d724ec.cba8c","wires":[[]]},{"id":"302ddf01.cbf0b8","type":"subflow:d5d724ec.cba8c","name":"","x":127,"y":214,"z":"5791498e.8d6878","wires":[["841c3e7c.b41288"]]},{"id":"841c3e7c.b41288","type":"function","name":"SetGlobalVars","func":"node.log(\"Add sensorNodes to global context\");\n\nvar sNodes = [ \n {nodeId:30, nodeLabel:\"Greenhouse\", \n sensors:[\n {childSensorId:1, childSensorLabel:\"Air\", sensorTypeLabel:\"Temperature\"},\n {childSensorId:2, childSensorLabel:\"Air\", sensorTypeLabel:\"Humidity\"},\n {childSensorId:130, childSensorLabel:\"AirBattery\", sensorTypeLabel:\"Voltage\"}\n ] \n }, \n {nodeId:50, nodeLabel:\"Aquaponics\", \n sensors:[\n {childSensorId:0, childSensorLabel:\"Water\", sensorTypeLabel:\"Temperature\"},\n {childSensorId:20, childSensorLabel:\"Air\", sensorTypeLabel:\"Humidity\"},\n {childSensorId:21, childSensorLabel:\"Air\", sensorTypeLabel:\"Temperature\"},\n {childSensorId:30, childSensorLabel:\"Light\", sensorTypeLabel:\"Lux\"}\n ]\n }\n ];\n\ncontext.global.sensorNodes = sNodes;\n\n \nmsg.payload = context.global.sensorNodes;\n\nreturn msg;","outputs":1,"noerr":0,"x":357,"y":213,"z":"5791498e.8d6878","wires":[[]]},{"id":"8ad9f121.3ea3b","type":"inject","name":"","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"x":127,"y":135,"z":"5791498e.8d6878","wires":[["841c3e7c.b41288"]]}]and then using it:
[{"id":"d14e00ff.cc9f7","type":"function","name":"MySensorIdInfo","func":"var sensorNode = getByNodeId(context.global.sensorNodes, \"\"+msg.nodeId);\nif (sensorNode != null) {\n console.log(\"NodeLabel = \" + sensorNode.nodeLabel);\n msg.nodeLabel = sensorNode.nodeLabel;\n \n var childNode = getByChildId(sensorNode.sensors, \"\"+msg.childSensorId);\n if (childNode != null) {\n console.log(\"ChildNodeLabel = \" + childNode.childSensorLabel);\n msg.childSensorLabel = childNode.childSensorLabel;\n msg.sensorTypeLabel = childNode.sensorTypeLabel;\n } else {\n msg.childSensorLabel = msg.childSensorId;\n msg.sensorTypeLabel = \"undefined\";\n }\n} else {\n node.error(\"No sensor match found in sensorNodes\");\n msg.nodeLabel = msg.nodeId;\n msg.childSensorLabel = msg.childSensorId;\n msg.sensorTypeLabel = \"undefined\"; \n}\n\nif (msg.sensorTypeLabel == \"undefined\") {\n return null;\n}\n\n//debug\nnode.log(\"nodeId = \" + msg.nodeId + \" :--: \" + \n\"nodeLabel = \" + msg.nodeLabel + \" :--: \" + \n\"childSensorId = \" + msg.childSensorId + \" :--: \" + \n\"childSensorLabel = \" + msg.childSensorLabel + \" :--: \" + \n\"sensorTypeLabel = \" + msg.sensorTypeLabel);\n\nreturn msg;\n\n//------- Helper Functions ----------//\n\nfunction getByNodeId(arr, value) {\n for (var i=0, iLen=arr.length; i<iLen; i++) {\n if (arr[i].nodeId == value) return arr[i];\n }\n}\n\nfunction getByChildId(arr, value) {\n for (var i=0, iLen=arr.length; i<iLen; i++) {\n if (arr[i].childSensorId == value) return arr[i];\n }\n}","outputs":1,"noerr":0,"x":614,"y":390,"z":"c3095d41.89f1e8","wires":[["6e57151f.370ffc","ae35a271.90c3b"]]}]The one other piece I added was a response to the MetricOrImperial question. Maybe some of this is useful. Thanks for your work.
Thank you, it's very usefull !
