Control adressable RBG strips

[jolerius]

I want to be able to control adressable RGB strip like neopixel or suck. So i can implement it into my home automation system.

It shouldn't be any problem since the programming is already done by arduino or other controller.
Could someone help me in the right direction?

[Adam McCartney]

I'm using some (102 to be exact) WS2812B LEDs connected to and arduino nano and NRF24L01.

using the Sketch found Here, the light shows up as a dimmable RGB Light.

currently working perfectly in Domoticz.

[AWI]

The 'domoticz' sketch was derived from this example, which uses a 16 pixel addressable strip but can be set to any length.