Enhanced Dallas Temperature example with permanent sensor index
-
Hi everyone,
I have made some improvements to the Dallas Temperature Sensors example.- made for non blocking main loop (useful for repeater and busy nodes)
block time max 15ms for sensor read procedure - it will remember a sensor index in EEPROM (2 bytes per sensor)
in case if you need to replace or add a new sensor to the 1Wire bus - all other sensors will keep own sensor index
You are welcome to use it:
https://github.com/leodesigner/mysensors-arduino/tree/master/DallasTemperatureSensor_Recall - made for non blocking main loop (useful for repeater and busy nodes)
-
Thanks a lot !
You make my day ! -
Thanks a lot !
You make my day !@redvoodoochild
You welcome, I hope it will be useful for you too.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login