fatal error: ets_sys.h: No such file or directory
-
Hi,
i'm currently trying to use ino to build a sketch for some ws2812b LEDs. in particular i'm using the Sketch found here: http://forum.mysensors.org/topic/2169/wall-mounted-mood-light/8
but i'm getting the error below. i've installed ESP8266 Libraries as instructed on their Github page.
can anyone help with the problems below?
pi@gatekeeper ~/dev/arduino/rgb_node_with_effects $ ino build -m nano328 Searching for Board description file (boards.txt) ... /usr/share/arduino/hardwar e/arduino/boards.txt Searching for Arduino lib version file (version.txt) ... /usr/share/arduino/lib/ version.txt Detecting Arduino software version ... 1.0.5 (2:1.0.5+dfsg2-4) Searching for Arduino core library ... /usr/share/arduino/hardware/arduino/cores /arduino Searching for Arduino standard libraries ... /usr/share/arduino/libraries Searching for Arduino variants directory ... /usr/share/arduino/hardware/arduino /variants Searching for make ... /usr/share/arduino/hardware/tools/avr/bin/make Searching for avr-gcc ... /usr/share/arduino/hardware/tools/avr/bin/avr-gcc Searching for avr-g++ ... /usr/share/arduino/hardware/tools/avr/bin/avr-g++ Searching for avr-ar ... /usr/share/arduino/hardware/tools/avr/bin/avr-ar Searching for avr-objcopy ... /usr/share/arduino/hardware/tools/avr/bin/avr-objc opy src/rgb_node_with_effects/rgb_node_with_effects.ino Searching for Arduino lib version file (version.txt) ... /usr/share/arduino/lib/ version.txt Detecting Arduino software version ... 1.0.5 (2:1.0.5+dfsg2-4) Scanning dependencies of src Scanning dependencies of arduino Scanning dependencies of Robot_Control Scanning dependencies of FastLED /usr/share/arduino/libraries/MySensors/core/MyMainESP8266.cpp:3:21: fatal error: ets_sys.h: No such file or directory #include "ets_sys.h" ^ compilation terminated. .build/nano328/Makefile.deps:254: recipe for target '.build/nano328/MySensors/core/MyMainESP8266.d' failed make: *** [.build/nano328/MySensors/core/MyMainESP8266.d] Error 1 Make failed with code 2
-
Never mind, bad installation of an old IDE on a Raspberry pi made this all go a bit wonky.
I'll try with a newer IDE built from Source.