Using mysensors for alarm build?
-
Hi!
I have set up my home-security system where MySensors is included.
I run two raspberry Pi - one with Domoticz + MySensors GW and one as FTP server.- In domoticz i use the security panel which is controlled with our cell-phones (location services)
- I have motion detectors from MySensors reporting movement.
- If my house is armed Domoticz and motion is detected i get a notification, siren on and so forth...
- Siren and lights are MySensored.
- I also run three IP cams reportion motion and adding pics/video to my ftp.
- I hope these can be used to detect motion in Domoticz in the future.
Its a fun project - but not so safe as a pro system.
For example i dont have battery backup if power fails.@sundberg84 What did hoh use to set up your siren? I'm working on my own home security project as well.
-
@lvidal07 At the moment (5 months later) im using RFLink and 433mhz firealarms.
They go both ways - fire => update on Domoticz and push notise. IntruderAlarm => starts firealarm.But at that point I worked on something like this from petewill: https://www.youtube.com/watch?v=mNsar_e8IsI&index=9&list=PLGzVpwPAKnPZ6F4fY8AevfVmcHdJFpKma
Controller: Proxmox VM - Home Assistant
MySensors GW: Arduino Uno - W5100 Ethernet, Gw Shield Nrf24l01+ 2,4Ghz
MySensors GW: Arduino Uno - Gw Shield RFM69, 433mhz
RFLink GW - Arduino Mega + RFLink Shield, 433mhz -
@lvidal07 At the moment (5 months later) im using RFLink and 433mhz firealarms.
They go both ways - fire => update on Domoticz and push notise. IntruderAlarm => starts firealarm.But at that point I worked on something like this from petewill: https://www.youtube.com/watch?v=mNsar_e8IsI&index=9&list=PLGzVpwPAKnPZ6F4fY8AevfVmcHdJFpKma
@sundberg84 Thanks for the info. Any reason for the switch?
-
@lvidal07 I extended my HA to both MySensors and RFLink/433mhz. There is a manufacturer of firealarms which are good and cheap using 433mhz,
-
@lvidal07 I extended my HA to both MySensors and RFLink/433mhz. There is a manufacturer of firealarms which are good and cheap using 433mhz,
@sundberg84 said:
There is a manufacturer of firealarms which are good and cheap using 433mhz,
Care to give a link ? :innocent:
-
-
Hi, i also did build a rflink to MySensors gateway on which all interesting 433Mhz message are translated to MySensors message.
e.g. my RFLINK<->MYS presents my weather station (LaCross WS2300) data, klik-aan-klik-uit RC and my Flamingo firealarms
-
@BartE Haha, that flamingo alarm looks exactly like my Nexa alarm... :)
-
Thanks as well. I decided to go with this alarm, http://www.ebay.com/itm/like/252094388277?dest=http%3A%2F%2Fwww.ebay.com%2Fitm%2F252094388277, probably more than I needed to pay, but I liked the idea of a strobe alarm.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login