Using mysensors for alarm build?

[lvidal07]

@sundberg84 What did hoh use to set up your siren? I'm working on my own home security project as well.

[sundberg84]

@lvidal07 At the moment (5 months later) im using RFLink and 433mhz firealarms.
They go both ways - fire => update on Domoticz and push notise. IntruderAlarm => starts firealarm.

But at that point I worked on something like this from petewill: https://www.youtube.com/watch?v=mNsar_e8IsI&index=9&list=PLGzVpwPAKnPZ6F4fY8AevfVmcHdJFpKma

[lvidal07]

@sundberg84 Thanks for the info. Any reason for the switch?

[sundberg84]

@lvidal07 I extended my HA to both MySensors and RFLink/433mhz. There is a manufacturer of firealarms which are good and cheap using 433mhz,

[fets]

@sundberg84 said:

There is a manufacturer of firealarms which are good and cheap using 433mhz,

Care to give a link ? :innocent:

[sundberg84]

www.nexa.se

[BartE]

Hi, i also did build a rflink to MySensors gateway on which all interesting 433Mhz message are translated to MySensors message.

e.g. my RFLINK<->MYS presents my weather station (LaCross WS2300) data, klik-aan-klik-uit RC and my Flamingo firealarms

[fets]

thanks both of you

[sundberg84]

@BartE Haha, that flamingo alarm looks exactly like my Nexa alarm... :)

[lvidal07]

Thanks as well. I decided to go with this alarm, http://www.ebay.com/itm/like/252094388277?dest=http%3A%2F%2Fwww.ebay.com%2Fitm%2F252094388277, probably more than I needed to pay, but I liked the idea of a strobe alarm.