OpenHAB not assigning node id

[chuckconnors]

I just built two new Humidity/Temp/Motion sensors. I'm using OpenHAB 1.3.8 with Mysensors 1.5.1

I can see that things are working okay in Arduino IDE:

req id
send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,sg=0,st=ok:
sensor started, id=255, parent=0, distance=1
req id
send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,sg=0,st=ok:
req id
send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,sg=0,st=ok:
req id
send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,sg=0,st=ok:
req id
send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,sg=0,st=ok:
req id
send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,sg=0,st=ok:
0
req id
send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,sg=0,st=ok:
req id
send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,sg=0,st=ok:
T: 80.60
req id
send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,sg=0,st=ok:
H: 40.00

Netcat to my ethernet gateway shows this:

root@debian#  nc 192.168.0.99 5003
255;255;3;0;3;
255;255;3;0;3;
255;255;3;0;3;
255;255;3;0;3;
255;255;3;0;3;
255;255;3;0;3;
255;255;3;0;3;
255;255;3;0;3;

OpenHAB is receiving information from my other Mysensors nodes and those values update. I am not seeing anything in the logs about the new sensors not being assigned. It's like it's not seeing them.

Can anyone help?

[gregl]

replied to your thread over here:
https://community.openhab.org/t/openhab-not-assigning-mysensors-node-id/12642