OpenHAB not assigning node id



  • I just built two new Humidity/Temp/Motion sensors. I'm using OpenHAB 1.3.8 with Mysensors 1.5.1

    I can see that things are working okay in Arduino IDE:

    req id
    send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,sg=0,st=ok:
    sensor started, id=255, parent=0, distance=1
    req id
    send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,sg=0,st=ok:
    req id
    send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,sg=0,st=ok:
    req id
    send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,sg=0,st=ok:
    req id
    send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,sg=0,st=ok:
    req id
    send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,sg=0,st=ok:
    0
    req id
    send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,sg=0,st=ok:
    req id
    send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,sg=0,st=ok:
    T: 80.60
    req id
    send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,sg=0,st=ok:
    H: 40.00
    
    

    Netcat to my ethernet gateway shows this:

    root@debian#  nc 192.168.0.99 5003
    255;255;3;0;3;
    255;255;3;0;3;
    255;255;3;0;3;
    255;255;3;0;3;
    255;255;3;0;3;
    255;255;3;0;3;
    255;255;3;0;3;
    255;255;3;0;3;
    

    OpenHAB is receiving information from my other Mysensors nodes and those values update. I am not seeing anything in the logs about the new sensors not being assigned. It's like it's not seeing them.

    Can anyone help?


  • Hero Member


Log in to reply
 

Suggested Topics

  • 22
  • 1
  • 132
  • 7
  • 2
  • 135

39
Online

11.2k
Users

11.1k
Topics

112.5k
Posts