3. [Solved] Function repeater not working

[Solved] Function repeater not working

  • Daemon D

    Help, function repeater not working
    Vera lite fw 1.7.830
    GW Arduino nano serial - MySensors Arduino Library v2.0.0 master
    node/repeater Arduino nano MySensors Arduino Library v2.0.0 master

    code node/repeater ID=3

    // Enable and select radio type attached
#define MY_RADIO_NRF24
// Enable debug prints to serial monitor
#define MY_DEBUG 
// Enable repeater functionality for this node
#define MY_REPEATER_FEATURE

    node ID = 4 and ID = 6 long distance and worked perfectly through the library 1.5.4 and repeater ID = 3

    After the transition to version 2, these two nodes fallen off

    Starting sensor (RNNNA-, 2.0.0)
TSM:INIT
TSM:RADIO:OK
TSP:ASSIGNID:OK (ID=3)
TSM:FPAR
TSP:MSG:SEND 3-3-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
TSP:MSG:READ 4-4-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
TSP:MSG:BC
TSP:MSG:READ 0-0-3 s=255,c=3,t=8,pt=1,l=1,sg=0:0
TSP:MSG:FPAR RES (ID=0, dist=0)
TSP:MSG:PAR OK (ID=0, dist=1)
TSM:FPAR:OK
TSM:ID
TSM:CHKID:OK (ID=3)
TSM:UPL
TSP:PING:SEND (dest=0)
TSP:MSG:SEND 3-3-0-0 s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=ok:1
TSP:MSG:READ 0-0-3 s=255,c=3,t=25,pt=1,l=1,sg=0:1
TSP:MSG:PONG RECV (hops=1)
TSP:CHKUPL:OK
TSM:UPL:OK
TSM:READY
Setup: 
!TSP:MSG:SEND 3-3-0-0 s=255,c=3,t=15,pt=6,l=2,sg=0,ft=0,st=fail:0100
TSP:MSG:SEND 3-3-0-0 s=255,c=0,t=17,pt=0,l=5,sg=0,ft=1,st=ok:2.0.0
TSP:MSG:SEND 3-3-0-0 s=255,c=3,t=6,pt=1,l=1,sg=0,ft=0,st=ok:0
TSP:MSG:READ 0-0-3 s=255,c=3,t=6,pt=0,l=1,sg=0:M
TSP:MSG:SEND 3-3-0-0 s=255,c=3,t=11,pt=0,l=12,sg=0,ft=0,st=ok:Alarm Sensor
TSP:MSG:SEND 3-3-0-0 s=255,c=3,t=12,pt=0,l=3,sg=0,ft=0,st=ok:1.0
TSP:MSG:SEND 3-3-0-0 s=1,c=0,t=1,pt=0,l=0,sg=0,ft=0,st=ok:
TSP:MSG:SEND 3-3-0-0 s=2,c=0,t=1,pt=0,l=0,sg=0,ft=0,st=ok:
TSP:MSG:SEND 3-3-0-0 s=3,c=0,t=1,pt=0,l=0,sg=0,ft=0,st=ok:
TSP:MSG:SEND 3-3-0-0 s=4,c=0,t=3,pt=0,l=0,sg=0,ft=0,st=ok:
TSP:MSG:SEND 3-3-0-0 s=5,c=0,t=3,pt=0,l=0,sg=0,ft=0,st=ok:
Request registration...
TSP:MSG:SEND 3-3-0-0 s=255,c=3,t=26,pt=1,l=1,sg=0,ft=0,st=ok:2
TSP:MSG:READ 0-0-3 s=255,c=3,t=27,pt=1,l=1,sg=0:1
Node registration=1
Init complete, id=3, parent=0, distance=1, registration=1
TSP:MSG:READ 4-4-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
TSP:MSG:BC
TSP:MSG:READ 6-6-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
TSP:MSG:BC
TSP:MSG:READ 4-4-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
TSP:MSG:BC
TSP:MSG:READ 4-4-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
TSP:MSG:BC
TSP:MSG:READ 6-6-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
TSP:MSG:BC
TSP:MSG:READ 4-4-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
TSP:MSG:BC
TSP:MSG:SEND 3-3-0-0 s=3,c=1,t=16,pt=0,l=1,sg=0,ft=0,st=ok:0
    0 tekka 1 Reply
  • tekka
    Admin

    @Daemon-D said:

    Starting sensor (RNNNA-, 2.0.0)

    Node 3 is not defined as repeater:
    RNNNA- indicates normal node operation. This also explains, why node 3 does not reply to I_FIND_PARENT requests:

    TSP:MSG:READ 4-4-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
TSP:MSG:BC
TSP:MSG:READ 6-6-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
TSP:MSG:BC
TSP:MSG:READ 4-4-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
TSP:MSG:BC
TSP:MSG:READ 4-4-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
TSP:MSG:BC
TSP:MSG:READ 6-6-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
TSP:MSG:BC
TSP:MSG:READ 4-4-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
TSP:MSG:BC

    Please double check and upload node 3 sketch if problem persists.

    0
  • Daemon D

    @Daemon-D said:

    // Enable repeater functionality for this node
#define MY_REPEATER_FEATURE

    that is enough to enable the repeater?

    0 tekka 1 Reply
  • tekka
    Admin

    @Daemon-D Please post the full repeater sketch

    0 Daemon D 1 Reply
  • Daemon D

    @tekka

    #include "CyberLib.h" //Библиотека от Cyber-Place.ru
#include <SPI.h>
#include <Bounce2.h>
// Enable and select radio type attached
#define MY_RADIO_NRF24
// Enable debug prints to serial monitor
#define MY_DEBUG 
// Enable repeater functionality for this node
#define MY_REPEATER_FEATURE

#define ConsoleComm 0
#define TIME_READ_INPUT_SEPIC_SIGN 1000 //время снятия показаний с входов
#define TIME_SEND_VERA_SEPTIC 66000 //время для отправки данных септика
#define TIME_SEND_VERA_SIGN 11000 //время для отправки данных сигнализации
#define TIME_SEND_VERA_220 53100 //время для отправки данных 220
#define RELAY_SIGN  6  // pin relay сигнализации
#define DIGITAL_INPUT_SEPTIC 7   // The digital input D7 септик
#define DIGITAL_INPUT_SIGN 8   // The digital input D8 сигнализация
#define INTERRUPT_220V 3   // пин датчика наличия 220
#define CHILD_VERA_SEPTIC 1   // Id Vera вирутального сенсора ошибки септика
#define CHILD_VERA_SIGN 2   // Id  Vera вирутального сенсора срабатывания сигнализации 
#define CHILD_VERA_220 3 // ID Vera вирутального сенсора наличия 220
#define CHILD_VERA_RELAY_SIGN 4 // Id Vera реле сигнализации 
#define CHILD_VERA_ROLLING 5 // Id Vera  рольставни
#define RELAY_ON 1  // GPIO value to write to turn on attached relay
#define RELAY_OFF 0 // GPIO value to write to turn off attached relay

//MySensor gw; // MySensor
Bounce debouncerInputSeptic = Bounce();
Bounce debouncerInputSign = Bounce();

MyMessage errorMsgSeptic(CHILD_VERA_SEPTIC, V_TRIPPED); // виртуальный сенсор ошибки септика
MyMessage errorMsgSign(CHILD_VERA_SIGN, V_TRIPPED); // виртуальный сенсор сигнализации
MyMessage errorMsg220(CHILD_VERA_220, V_TRIPPED); // виртуальный сенсор 220

int powerlostint; // храним нарастающим итогом переходы 0 по 220
bool powerlost, valueSeptic, valueSign;
unsigned long currentTime;
unsigned long loopTimeRead, loopTimeSeptic, loopTimeSign, loopTime220;
Metro timer_read = Metro(TIME_READ_INPUT_SEPIC_SIGN); // храним время опросов датчиков входов
Metro time_send_septic = Metro(TIME_SEND_VERA_SEPTIC); // храним время отправки данных на Vera о септике
Metro time_send_sign = Metro(TIME_SEND_VERA_SIGN); // храним время отправки данных на Vera о сигнализации
Metro time_send_220 = Metro(TIME_SEND_VERA_220); // храним время отправки данных на Vera о 220

void presentation()  {

 // Initialize library and add callback for incoming messages
  //  gw.begin(incomingMessage, AUTO, true); //repeater node

    // Send the sketch version information to the gateway and Controller
    sendSketchInfo("Alarm Sensor", "1.0");
    present(CHILD_VERA_SEPTIC, S_MOTION); //alarm D7
    present(CHILD_VERA_SIGN, S_MOTION); //alarm D8
    present(CHILD_VERA_220, S_MOTION); //alarm 220
    // Register all sensors to gw (they will be created as child devices)
    present(CHILD_VERA_RELAY_SIGN, S_LIGHT); //relay D6
    present(CHILD_VERA_ROLLING, S_LIGHT); // вирутальное реле для рольставень

}

//********************обработчики прерываний*******************************
void  detect_up() { // обработка внешнего прерывания. Сработает по переднему фронту

    powerlostint++; // если 50 раз в секунду получаем прерывание, увеличиваем powerlostint
}


//****************************SETUP*********************************************


void setup() {

    UART_Init(115200);//инициализация последовательного порта
#if ConsoleComm
    Serial << "Setup: " <<  endl;
#endif

  
    // Then set relay pins in output mode
    pinMode(RELAY_SIGN, OUTPUT);
    // Set relay to last known state (using eeprom storage)
    D4_Out; //Настраиваем пин D4 на выход для управления рольставнями
    pinMode(DIGITAL_INPUT_SEPTIC, INPUT);  // определяем DIGITAL_INPUT_SEPTIC как вход
    digitalWrite(DIGITAL_INPUT_SEPTIC, HIGH);     // подключить подтягивающий резистор
    pinMode(DIGITAL_INPUT_SIGN, INPUT);  // определяем IGITAL_INPUT_SENSOR_D7 как вход
    digitalWrite(DIGITAL_INPUT_SIGN, HIGH);     // подключить подтягивающий резистор

    // After setting up the button, setup debouncer
    debouncerInputSeptic.attach(DIGITAL_INPUT_SEPTIC);
    debouncerInputSeptic.interval(5);
    debouncerInputSign.attach(DIGITAL_INPUT_SIGN);
    debouncerInputSign.interval(5);

}

//**************************** LOOP ********************************************************

void loop() {

   // gw.process(); // By calling process() you route messages in the background
    debouncerInputSeptic.update();  // обновляем статус боунсера септика
    debouncerInputSign.update(); // обновляем статус боунсера сигнализации

    if (timer_read.check() == 1) ReadD(); // через TIME_READ_INPUT_SEPIC_SIGN запускаем ReadD()
    if (time_send_septic.check() == 1) SendVeraSeptic(); // через TIME_SEND_VERA_SEPTIC запускаем SendVeraSeptic()
    if (time_send_sign.check() == 1) SendVeraSign(); // через TIME_SEND_VERA_SIGN запускаем SendVeraSign()
    if (time_send_220.check() == 1) SendVera220(); // через TIME_SEND_VERA_220 запускаем SendVera220()


}

//************************ END LOOP **********************************************************

//************************** ReadD() *********************************************************

// считываем данные со входов

void ReadD() {

    // Get the update value
    valueSeptic = debouncerInputSeptic.read();

    // Get the update value
    valueSign = debouncerInputSign.read();

    //valueSign = digitalRead(DIGITAL_INPUT_SIGN);
#if ConsoleComm
    Serial << "valueSign: " << valueSign << endl;
    Serial << "valueSeptic: " << valueSeptic << endl;
    Serial << "powerlost: " << powerlost << endl;
#endif

}

//******************************** END ReadD() ****************************************************

//********************************* SendVeraSeptic() ***********************************************

// отсылаем данные на Vera о септике
void SendVeraSeptic() {
#if ConsoleComm
    Serial << "SendVeraSeptic(): " << valueSeptic << endl;
#endif
    send(errorMsgSeptic.set(valueSeptic ? "1" : "0")); // Send tripped value to gw

}

//********************************* END SendVeraSeptic() ***********************************************

//********************************* SendVeraSign() ***********************************************

// отсылаем данные на Vera о сигнализации
void SendVeraSign() {
#if ConsoleComm
    Serial << "SendVeraSign(): " << valueSign << endl;
#endif
    send(errorMsgSign.set(valueSign ? "1" : "0")); // Send tripped value to gw

}

//********************************* END SendVeraSign() ***********************************************

//********************************* SendVera220() ***********************************************

// отсылаем данные на Vera о 220
void SendVera220() {

#if ConsoleComm
    Serial << "220: " << powerlostint << endl;
#endif
    attachInterrupt(digitalPinToInterrupt(INTERRUPT_220V),detect_up, LOW); // включаем прерывание чтобы наловить фронты 220
    delay(2); // нужен, т.к. бывает не успевает собрать данные
    if (powerlostint > 0) powerlost = false; // если получили кучу прерываний, значит 220 есть
    else powerlost=true;	// если нет прерываний, нет и 220
    detachInterrupt(digitalPinToInterrupt(INTERRUPT_220V)); //временно выключаем прерывание
    send(errorMsg220.set(powerlost ? "1" : "0")); // Send tripped value to gw
    powerlostint=0; // обнуляем счётчик прерываний
}

//********************************* END SendVera220() ***********************************************

//********************************** incomingMessage ************************************************

void receive(const MyMessage &message) {
    // We only expect one type of message from controller. But we better check anyway.
    if (message.type == V_LIGHT) {
        // Change relay state
        if (message.sensor == CHILD_VERA_RELAY_SIGN) { // если пришло для сигнализации
            digitalWrite(RELAY_SIGN, message.getBool() ? RELAY_ON : RELAY_OFF);
            // Store state in eeprom
            // gw.saveState(message.sensor, message.getBool());
        }
        if (message.sensor == CHILD_VERA_ROLLING) { // если пришло для рольставень
            detachInterrupt(digitalPinToInterrupt(INTERRUPT_220V)); //временно выключаем прерывание
            if (message.getBool() == true) { // если пришла 1 то закрываем
                for (int i = 0; i < 5; i++) {
                    closers();
                }
            } else if (message.getBool() == false)
                for (int i = 0; i < 5; i++) { // если пришёл 0 то открываем
                    for (int i = 0; i < 5; i++) {
                        openrs();
                    }

                }
            //  attachInterrupt(digitalPinToInterrupt(INTERRUPT_220V), detect_up, LOW);  // настроить срабатывание прерывания interrupt1 на pin 2 на низкий уровень
        }
        // Write some debug info
#if ConsoleComm
        Serial.print("Incoming change for sensor:");
        Serial.print(message.sensor);
        Serial.print(", New status: ");
        Serial.println(message.getBool());
#endif
    }
}

//************************************* END incomingMessage ******************************************
    0 tekka 1 Reply
  • tekka
    Admin

    @Daemon-D Hmm...where do you load the MySensors lib?

    #include <MySensors.h>

    (this statement is missing in your sketch)

    0 Daemon D sincze 2 Replies
  • Daemon D

    @tekka

    Используем библиотеку MySensors версии 2.0.1-beta из папки: C:\Users\Daemon\Google Drive\Project\libraries\MySensors

    Already I tried the beta of the development, all the same.

    0
  • sincze
    MySensors Evangelist

    @tekka interesting. I assume people are already using repeaters in 2.0.x so it will be safe for me to. Migrate from 1.5.4 to 2.0.0??

    0 Daemon D tekka 2 Replies
  • Daemon D

    @sincze said:

    @tekka interesting. I assume people are already using repeaters in 2.0.x so it will be safe for me to. Migrate from 1.5.4 to 2.0.0??

    Yes, Migrate from 1.5.4 to 2.0.0

    0 sincze 1 Reply
  • sincze
    MySensors Evangelist

    @Daemon-D okay for you still not working right??

    0 Daemon D 1 Reply
  • Daemon D

    @sincze said:

    @Daemon-D okay for you still not working right??
    Repeater not working 😞

    0 tekka 1 Reply
  • tekka
    Admin

    @Daemon-D I'm not sure you got my question regarding the issue you have with your repeater node. I suggest you try the RepeaterNode sketch from the MySensors examples and post the debug log here.

    0 Daemon D 1 Reply
  • tekka
    Admin

    @sincze said:

    @tekka interesting. I assume people are already using repeaters in 2.0.x so it will be safe for me to. Migrate from 1.5.4 to 2.0.0??

    Yes, should be safe to use.

    0
  • Daemon D

    @tekka

    @tekka said:

    @Daemon-D I'm not sure you got my question regarding the issue you have with your repeater node. I suggest you try the RepeaterNode sketch from the MySensors examples and post the debug log here.

    The problem was solved by a code transfer at the very beginning as a test sketch before #include

    // Enable debug prints to serial monitor
#define MY_DEBUG 

// Enable and select radio type attached
#define MY_RADIO_NRF24
//#define MY_RADIO_RFM69

// Enabled repeater feature for this node
#define MY_REPEATER_FEATURE```
    0 tekka 1 Reply
  • tekka
    Admin

    @Daemon-D Can you explain how you solved the issue - I'm sure other user could also profit if they face a similar problem. Thanks.

    0 Daemon D 1 Reply
  • Daemon D

    @tekka said:

    @Daemon-D Can you explain how you solved the issue - I'm sure other user could also profit if they face a similar problem. Thanks.

    The problem was solved by moving to the top of the sketch exactly like the to test the sketch before #include

    // Enable debug prints to serial monitor
#define MY_DEBUG 

// Enable and select radio type attached
#define MY_RADIO_NRF24
//#define MY_RADIO_RFM69

// Enabled repeater feature for this node
#define MY_REPEATER_FEATURE

#include <SPI.h>
#include <MySensors.h>
    2
Log in to reply
 

Suggested Topics

0
Online

11.4k
Users

11.1k
Topics

112.7k
Posts



Copyright 2019 Sensnology   |   Forum Guidelines   |   Privacy Policy   |   Terms of Service