Failed to report version in skecth

[Ether]

Hello,

When I'm using ack in sendSketchInfo, the gateway never see version string, whereas with no ack (as default) there's no problem.

Here code of presentation
void presentation()
{
sendSketchInfo("sketchABC", "v1.0",[true|false]);
present(CHILD_DOOR_ID, S_DOOR, "garageDoor", true);
}

Result on gateway with ack=false:
0;255;3;0;9;TSP:MSG:READ 123-123-0 s=255,c=3,t=11,pt=0,l=9,sg=0:sketchABC
123;255;3;0;11;sketchABC
0;255;3;0;9;TSP:MSG:READ 123-123-0 s=255,c=3,t=12,pt=0,l=4,sg=0:v1.0
123;255;3;0;12;v1.0
0;255;3;0;9;TSP:MSG:READ 123-123-0 s=234,c=0,t=0,pt=0,l=10,sg=0:garageDoor
0;255;3;0;9;TSP:MSG:ACK msg
0;255;3;0;9;TSP:MSG:SEND 0-0-123-123 s=234,c=0,t=0,pt=0,l=10,sg=0,ft=0,st=ok:garageDoor
123;234;0;0;0;garageDoor

Result on sensor with ack= false
TSP:MSG:SEND 123-123-0-0 s=255,c=3,t=11,pt=0,l=9,sg=0,ft=0,st=ok:sketchABC
!TSP:MSG:SEND 123-123-0-0 s=255,c=3,t=12,pt=0,l=4,sg=0,ft=0,st=fail:v1.0
TSP:MSG:SEND 123-123-0-0 s=234,c=0,t=0,pt=0,l=10,sg=0,ft=1,st=ok:garageDoor
Request registration...
!TSP:MSG:SEND 123-123-0-0 s=255,c=3,t=26,pt=1,l=1,sg=0,ft=0,st=fail:2
TSP:MSG:READ 0-0-123 s=234,c=0,t=0,pt=0,l=10,sg=0:garageDoor
TSP:MSG:READ 0-0-123 s=255,c=3,t=27,pt=1,l=1,sg=0:1
Node registration=1

Result on gateway with ack=true:
0;255;3;0;9;TSP:MSG:READ 123-123-0 s=255,c=3,t=11,pt=0,l=9,sg=0:sketchABC
0;255;3;0;9;TSP:MSG:ACK msg
0;255;3;0;9;!TSP:MSG:SEND 0-0-123-123 s=255,c=3,t=11,pt=0,l=9,sg=0,ft=0,st=fail:sketchABC
123;255;3;0;11;sketchABC
0;255;3;0;9;TSP:MSG:READ 123-123-0 s=234,c=0,t=0,pt=0,l=10,sg=0:garageDoor
0;255;3;0;9;TSP:MSG:ACK msg
0;255;3;0;9;TSP:MSG:SEND 0-0-123-123 s=234,c=0,t=0,pt=0,l=10,sg=0,ft=0,st=ok:garageDoor
123;234;0;0;0;garageDoor

Result on sensor with ack=true
TSP:MSG:SEND 123-123-0-0 s=255,c=3,t=11,pt=0,l=9,sg=0,ft=0,st=ok:sketchABC
!TSP:MSG:SEND 123-123-0-0 s=255,c=3,t=12,pt=0,l=4,sg=0,ft=0,st=fail:v1.0
TSP:MSG:SEND 123-123-0-0 s=234,c=0,t=0,pt=0,l=10,sg=0,ft=1,st=ok:garageDoor
Request registration...
!TSP:MSG:SEND 123-123-0-0 s=255,c=3,t=26,pt=1,l=1,sg=0,ft=0,st=fail:2
TSP:MSG:READ 0-0-123 s=234,c=0,t=0,pt=0,l=10,sg=0:garageDoor
TSP:MSG:READ 0-0-123 s=255,c=3,t=27,pt=1,l=1,sg=0:1
Node registration=1

Any idea?

Note : May I have to do something special with ack (in presentation and send too)?

[cimba007]

What is your code doing after the presentation? I always use a little wait after the presentation as many rapid presentations might congest the gateway:

void presentation()
{ 
  // Send the sketch version information to the gateway and Controller
  char datetime[24]; // 22 + 1 should ben enough
  snprintf(datetime,24,"%s | %s",__DATE__,__TIME__);
  //Serial.print(F("SketchInfo: "));
  //Serial.println(datetime);
  
  sendSketchInfo("Microwave/Knocks.", datetime);
  mw_s_var1.present();
  wait(10);
  mw_s_var2.present();
  wait(10);

  /*
  ks_s_var1.present();
  wait(10);
  ks_s_var2.present();
  wait(10);
  */
}