Error : Reconnection the sensors when gateway was down and pass to up
-
Hello,
I found a defect when serial gateway pass to up to down and down to up.
I have a serial gateway and 2 sensors.
At first time :
Gateway is up and I start sensors. result : Sensors is detect by gateway
If gateway go down and go up after a few minutes, sensors are no longer detected after.
If i made a reset on sensors, sensors are again detecting
I had the idea to put a push button on the case to make a reset of the sensors but there is also the possibility of putting an Hall element AH44E on the pin reset so with a magnet able to do a reset without opening the case
What do you think ?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login