RelayWithButtonActuator..what if Vera is offline?

[mitekg]

thx, @hek

i see, BUT
gw.getStatus(RELAY_1+i, V_LIGHT); - return the real value in char.

gw.getMessage() didnt return any message!
so i cant set an initial state of relays!
For me now working code is:
// Request/wait for relay status
int status = atoi(gw.getStatus(RELAY_1 + i, V_LIGHT));
setRelayStatus(RELAY_1 + i, status);

	//message_s message = gw.getMessage();
	//setRelayStatus(message); // Wait here until status message arrive from gw

[hek]

@mitekg

Strange, the example works for me.

[mitekg]

@hek
did u try it on latest lib version?

[hek]

@mitekg

Ah.. .I think I know... Darn.. there was a "bugfix" done some weeks ago in the RelayActuator. This might have broken the functionality.

Try removing

message.header.messageType==M_SET_VARIABLE && 

from the if-statement in setRelayStatus.

[petewill]

@gregl

Funny, I was just working on something like this and I was wondering the same thing. My project is a little different in that I want to shut down a power supply if the temperature gets too high. Here's a little quick background to help you better understand my goal... I made a power supply out of a computer power supply to provide 12v, 5v and 3.3v current to my various sensors around the house. I'm a little nervous about leaving it running 24/7 and how hot it may get. So, I thought, why not use HEK's awesome sensors to add an overheat safety control. The thing is, I need to be able to shut it down with the attached DHT22 sensor in case the connection ever goes out between Vera and the child device. I'm thinking I'll have to modify the RelayWithButtonActuator code like this:

1. Remove "gw.getStatus(CHILD_ID, V_LIGHT);" from setup() so it doesn't wait here when it first starts

2. Change the button push if statment so it will immediately change the state of the relay then send an update to Vera
   if (buttVal == HIGH && switched == 0 && millis() - pressTime > debounce) {
   // Switch state if button pressed more than 200 msec
   state = state==1?0:1;
   gw.sendVariable(CHILD_ID, V_LIGHT, state); //change this code here
   switched = 1; // No more switches until button is released
   }
   Is this ok to do this way?

3. Write another if statement that will check for the temperature of the DHT sensor and shut off the relay if it's too hot then send update to Vera.

Thoughts?

[gregl]

@petewill said:

s a little quick background to help you better understand my goal... I made a power supply out of a computer power supply to provide 12v, 5v and 3.3v current to my various sensors around the house. I'm a little nervous about leaving it running 24/7 and how hot it may get. So, I thought, why not use HEK's awesome sensors to add an overheat safety control. The thing is, I need to be able to shut it down with the attached DHT22 sensor in case the connection ever goes out between Vera and the child device. I'm thinking I'll have to modify the RelayWithButtonActuator code like this:

Hi Pete,

Personally if i was worried about the powersupply getting too hot, then id be using a simple passive device rather than relying on my dodgy code..something like this: http://www.jaycar.com.au/productView.asp?ID=ST3821 The powersupply will likely already contain some protection...

that said, unless you are doing something really dodgy, i doubt even a houseful of sensors will put more than a few amps of load on the powersupply, causing it to get hot. Unless of course there is a fault/short in your wiring! But if you are running cable around your house to power all these sensors from a central powersupply you will be using some fuses to protect the powersupply or worse...a fire starting. Better still some DC breakers like: http://www.jaycar.com.au/productView.asp?ID=SF2295

But...since we love this stuff...sure put a thermometer there to monitor your p/s temp...but more exciting (imho) would be to put some current sensors on each line to see what sort of current you are drawing:
http://www.ebay.com/itm/ACS712-20A-range-Current-Sensor-Module-Module-for-Arduino-Raspberry-pi

Greg

[gregl]

@BulldogLowell Thanks mate.
Makes more sense now.... ill try to use it to help i sink in!

[BulldogLowell]

@gregl

you will get there. Practice and making mistakes are key to learning a new language, spoken or computer.

FYI a great (but pricey) book is "Beginning C for Arduino"

perhaps your local library can get it for you. I'm lucky, we have a terrific, very well connected library and I can get almost any book for $1.00 for a month.

[petewill]

@gregl said:

Personally if i was worried about the powersupply getting too hot, then id be using a simple passive device rather than relying on my dodgy code..something like this: http://www.jaycar.com.au/productView.asp?ID=ST3821 The powersupply will likely already contain some protection...

that said, unless you are doing something really dodgy, i doubt even a houseful of sensors will put more than a few amps of load on the powersupply, causing it to get hot. Unless of course there is a fault/short in your wiring! But if you are running cable around your house to power all these sensors from a central powersupply you will be using some fuses to protect the powersupply or worse...a fire starting. Better still some DC breakers like: http://www.jaycar.com.au/productView.asp?ID=SF2295

But...since we love this stuff...sure put a thermometer there to monitor your p/s temp...but more exciting (imho) would be to put some current sensors on each line to see what sort of current you are drawing:
http://www.ebay.com/itm/ACS712-20A-range-Current-Sensor-Module-Module-for-Arduino-Raspberry-pi

Greg

Wow, I didn't even think of a thermal fuse. That's a fantastic idea! Good call on the current monitoring too! I don't have the time for it now but will definitely consider it for the future. I do have everything running through fuses. Hopefully all this won't be necessary but you can never be too safe.

[gregl]

@hek
Hi Hek,

Personally i think the owner should be the RelayActuator. Also i dont think the status needs to be "saved" between sketch restart...obviously this could be an option.

I'm thinking of a use case where the sketch would be doing the same job as a zwave light controller ( aeon/fibraro ) -these operate independant of Vera, but will obviously accept commands and tell vera any updates made locally, but i dont believe they ask Vera what was my last status when they reboot? ( or am i wrong?) -too late to test /play with mains voltage for me!

Cheers, Greg

[BulldogLowell]

@gregl

this seems safer to me but is it consistent with the switch paradigm for vera?

what happens if you switch a zwave wall outlet and vera is off, but went off in the ON state?

[hek]

@gregl

Yep, agree..
Distribute logic as far as possible out in the actuator-grid.
So I would opt in for "remembering" the state in case of power-fail.. That is how I've configured all my z-wave devices and works like old "dumb" switches (=high WAF).