Problems with temperature sensor
-
Hello
I have 10 dallas temp sensor into to an Arduino. The problem is that sometimes domoticz mixes temp sensors together. Any more having the same problem? Or does anyone have a solution.
Tomas
-
Hello
I have 10 dallas temp sensor into to an Arduino. The problem is that sometimes domoticz mixes temp sensors together. Any more having the same problem? Or does anyone have a solution.
Tomas
Hi I also use DS18B20 but I have not any problems with the controller mixes the DS18B20. But all DS18B20 has a unique address, which you can read out and use.
https://www.hacktronics.com/Tutorials/arduino-1-wire-address-finder.html
//Mattias
-
No experience with domoticz, but this may help nevertheless: https://github.com/rejoe2/MySensors-Dallas-Address-ChildID-Consistency
You will find some sketches for using more than one DS18B20 on one bus and some explanation also.General remark: as long as you do not change your hardware setup, you should find the same point of measurement reported under a specific temp-Child-ID using the standard sketches. The sketches above go a little further wrt. this.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login