Your browser does not seem to support JavaScript. As a result, your viewing experience will be diminished, and you may not be able to execute some actions.

Please download a browser that supports JavaScript, or enable it if it's disabled (i.e. NoScript).

💬 MyPulse Sensor

openhardware.io last edited by openhardware.io

https://www.openhardware.io/view/352/MyPulse-Sensor
Reply Quote 0
1 Reply Last reply
miljume last edited by

Nice work! Can you please upload the STL file as well?
Reply Quote 0
1 Reply Last reply
scalz Hardware Contributor last edited by

just received and assembled this tiny pcb

So i've updated projects files (git and here) with some pics, and stl. STL are wip but as you can see it perfectly fits.
Reply Quote 1
1 Reply Last reply
miljume last edited by

The electronics work perfect in the TH version but it seems like the enclosure is too small for it to fit.
I needed to carve a bit both on the bottom and lid to be able to mount them together
Reply Quote 1
1 Reply Last reply
scalz Hardware Contributor last edited by

oki.
i'll improve this when i'll get a bit more time, that's quick to do. I've assembled smd version only so far.
thx for feedback
Reply Quote 0
1 Reply Last reply
xydix last edited by

Hi. Thank you for sharing your board. It seems awesome. I got a question. When I read the BOM, I think I should use 100 ohm, 330 ohm and 1500 ohm resistor. When I look at the schematic picture it says 100k 330k. What resistor should I use?
Reply Quote 1
1 Reply Last reply
xydix last edited by @scalz

@scalz
I guess you have the answer to that question?
Reply Quote 0
1 Reply Last reply

7
Posts

1940
Views

Suggested Topics

How to read frequency and SWP output from watermark sensor
Development • arduino moisture pulse frequency watermark • • pierrot10

36

0
Votes

36
Posts

4998
Views

@suhaila96 Hello I have not seen your question since I reviewed this topics, today. What do you mean about "setup your circuit"? How did you connected you watermark sensor and to what?
Connect sensors directly to the Gateway (again)
Development • gateway sensor development • • mortommy

22

0
Votes

22
Posts

14535
Views

@Tmaster You give each sensor a child id (0-254) in the node.
💬 Arduino Pro Mini Shield for RFM69(H)W
OpenHardware.io • arduino rfm69 temperature sensor humidity pcb atmega328 atmega328p si7021 rfm69hw wireless bme280 pressure interstitial • • openhardware.io

53

1
Votes

53
Posts

11590
Views

@gohan said in Arduino Pro Mini Shield for RFM69(H)W: If I remeber right that pin is used as input so the RFM69 is not receiving any 5v signal. In addition there are people claming they have the RFM69 module working on 5v on data pins and 3.3v on vcc, but I hardly suggest to do it. thank you just what i thought . about direct 5v on data...well... i seen a big red sign saying n :DONT do it! lol Level converters are so cheap...that i ordered 5 or 10 thoguether with rfm69 board. sorry about hijack this topic, i though i was on general discussion
Binary Control Modules , Switches, or Outlets on a Vera Edge
My Project • sensor • • mntlvr

33

0
Votes

33
Posts

13722
Views

@BulldogLowell said: @mntlvr said: And if all six switches are set to gnd the total current would only be 1.5 ma (5volts /20k)x6=.0015 amps I believe. the internal pullup resistors are 20k-50k according to arduino spec. yeah, I know, but if you are underpowered already (the radio....) the extra draw may create an issue... who the heck knows. I'll try on one of mine when I get the chance... your code works, and that's a treat, but now I need to understand why the simpler execution of the same code doesn't seem to cooperate with your rig. weird... you code with pinMode(buttonPin[i], INPUT); exactly same board and USB power supply and same transceiver, here are the results Sending device info...sensor started, id 32 send: 32-32-0-0 s=255,c=0,t=17,pt=0,l=5,st=ok:1.4.1 send: 32-32-0-0 s=255,c=3,t=6,pt=1,l=1,st=ok:0 read: 0-0-32 s=255,c=3,t=6,pt=0,l=1:I send: 32-32-0-0 s=255,c=3,t=11,pt=0,l=13,st=ok:RemoteControl send: 32-32-0-0 s=255,c=3,t=12,pt=0,l=4,st=ok:1.15 Setting up Pin0 send: 32-32-0-0 s=0,c=0,t=0,pt=0,l=0,st=ok: Setting up Pin1 send: 32-32-0-0 s=1,c=0,t=0,pt=0,l=0,st=ok: Setting up Pin2 send: 32-32-0-0 s=2,c=0,t=0,pt=0,l=0,st=ok: Setting up Pin3 send: 32-32-0-0 s=3,c=0,t=0,pt=0,l=0,st=ok: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: Setting up Pin4 send: 32-32-0-0 s=4,c=0,t=0,pt=0,l=0,st=ok: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: Setting up Pin5 send: 0-0-0-0 s=5,c=0,t=0,pt=0,l=0,st=ok: read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch Sensor presentation complete send: 0-0-0-0 s=3,c=1,t=16,pt=2,l=2,st=ok:1 Pin 3 changed state... New State: Tripped send: 0-0-0-0 s=0,c=1,t=16,pt=2,l=2,st=ok:1 Pin 0 changed state... New State: Tripped send: 0-0-0-0 s=1,c=1,t=16,pt=2,l=2,st=ok:1 Pin 1 changed state... New State: Tripped send: 0-0-0-0 s=2,c=1,t=16,pt=2,l=2,st=ok:1 Pin 2 changed state... New State: Tripped send: 0-0-0-0 s=3,c=1,t=16,pt=2,l=2,st=ok:0 Pin 3 changed state... New State: Not Tripped
Motion Sensing sketch which is also a repeater
Troubleshooting • sensor motion repeater sketch • • Dean

5

0
Votes

5
Posts

3275
Views

Hey guys, I was justing wondering, is there a way to deactivate the motion sensor if not being used? Eg: My motion sensors are connected to Homeseer and they show up as sensors but I was wondering if I could have an ON / OFF control to deactivate or active the motion as needed.
Problem with connecting several temperature sensors
Troubleshooting • temperature sensor • • Mouridsen

10

0
Votes

10
Posts

3524
Views

@Mouridsen Thanks for the follow up!
💬 MySensors RS-485 Universal Module
OpenHardware.io • mysensors sensor rs485 button 485 wall plate • • openhardware.io

5

0
Votes

5
Posts

43
Views

@YuryPol as far as I know, all licenses require some form of documentation. In all cases I know of, this is documented with the license or on the licenses official site.
Garage door status sensors ideas
General Discussion • sensor door garage • • McQueen

27

0
Votes

27
Posts

5176
Views

That's right @gohan , if you place the "door closed"reed near the floor then only first interrupt should matter, first interrupt should tell you the door is closed. Same for a second reed placed high - the "door open" reed, that would tell you the door is open when interrupted the first time. @McQueen, could be close to you needs ...

💬 MyPulse Sensor

Suggested Topics

How to read frequency and SWP output from watermark sensor
Development • arduino moisture pulse frequency watermark • • pierrot10

Connect sensors directly to the Gateway (again)
Development • gateway sensor development • • mortommy

💬 Arduino Pro Mini Shield for RFM69(H)W
OpenHardware.io • arduino rfm69 temperature sensor humidity pcb atmega328 atmega328p si7021 rfm69hw wireless bme280 pressure interstitial • • openhardware.io

Binary Control Modules , Switches, or Outlets on a Vera Edge
My Project • sensor • • mntlvr

Motion Sensing sketch which is also a repeater
Troubleshooting • sensor motion repeater sketch • • Dean

Problem with connecting several temperature sensors
Troubleshooting • temperature sensor • • Mouridsen

💬 MySensors RS-485 Universal Module
OpenHardware.io • mysensors sensor rs485 button 485 wall plate • • openhardware.io

Garage door status sensors ideas
General Discussion • sensor door garage • • McQueen

20
Online

11.6k
Users

11.2k
Topics

113.0k
Posts

💬 MyPulse Sensor

Suggested Topics

How to read frequency and SWP output from watermark sensor Development • arduino moisture pulse frequency watermark • • pierrot10

Connect sensors directly to the Gateway (again) Development • gateway sensor development • • mortommy

💬 Arduino Pro Mini Shield for RFM69(H)W OpenHardware.io • arduino rfm69 temperature sensor humidity pcb atmega328 atmega328p si7021 rfm69hw wireless bme280 pressure interstitial • • openhardware.io

Binary Control Modules , Switches, or Outlets on a Vera Edge My Project • sensor • • mntlvr

Motion Sensing sketch which is also a repeater Troubleshooting • sensor motion repeater sketch • • Dean

Problem with connecting several temperature sensors Troubleshooting • temperature sensor • • Mouridsen

💬 MySensors RS-485 Universal Module OpenHardware.io • mysensors sensor rs485 button 485 wall plate • • openhardware.io

Garage door status sensors ideas General Discussion • sensor door garage • • McQueen

20Online

11.6kUsers

11.2kTopics

113.0kPosts

How to read frequency and SWP output from watermark sensor
Development • arduino moisture pulse frequency watermark • • pierrot10

Connect sensors directly to the Gateway (again)
Development • gateway sensor development • • mortommy

💬 Arduino Pro Mini Shield for RFM69(H)W
OpenHardware.io • arduino rfm69 temperature sensor humidity pcb atmega328 atmega328p si7021 rfm69hw wireless bme280 pressure interstitial • • openhardware.io

Binary Control Modules , Switches, or Outlets on a Vera Edge
My Project • sensor • • mntlvr

Motion Sensing sketch which is also a repeater
Troubleshooting • sensor motion repeater sketch • • Dean

Problem with connecting several temperature sensors
Troubleshooting • temperature sensor • • Mouridsen

💬 MySensors RS-485 Universal Module
OpenHardware.io • mysensors sensor rs485 button 485 wall plate • • openhardware.io

Garage door status sensors ideas
General Discussion • sensor door garage • • McQueen

20
Online

11.6k
Users

11.2k
Topics

113.0k
Posts