💬 MyPulse Sensor
-
-
Nice work! Can you please upload the STL file as well?
-
just received and assembled this tiny pcb
So i've updated projects files (git and here) with some pics, and stl. STL are wip but as you can see it perfectly fits.
-
The electronics work perfect in the TH version but it seems like the enclosure is too small for it to fit.
I needed to carve a bit both on the bottom and lid to be able to mount them together
-
oki.
i'll improve this when i'll get a bit more time, that's quick to do. I've assembled smd version only so far.
thx for feedback
-
Hi. Thank you for sharing your board. It seems awesome. I got a question. When I read the BOM, I think I should use 100 ohm, 330 ohm and 1500 ohm resistor. When I look at the schematic picture it says 100k 330k. What resistor should I use?
-
@scalz
I guess you have the answer to that question
?
Suggested Topics
-
Current Monitoring - How?
Hardware • 14 Jan 2015, 07:32 • Dean 17 Jan 2016, 15:50 -
How long a cable can one have between the uC and a sensor?
Hardware • 14 Dec 2014, 16:53 • Zeph 16 Dec 2014, 02:33 -
Garage door status sensors ideas
General Discussion • 3 Jan 2018, 03:18 • McQueen 8 Jan 2018, 17:18 -
Connect humidity sensor to OpenHAB
OpenHAB • 12 Feb 2015, 03:18 • vladimir 18 Feb 2015, 12:38 -
Connect sensors directly to the Gateway (again)
Development • 12 Jan 2016, 09:01 • mortommy 1 Sept 2016, 12:58 -
Sense if my Kitchen hood is running?
General Discussion • 16 May 2016, 10:19 • ausbremen 27 May 2016, 20:40 -
Plantation Shutters - Auto\Lux\ Motorized 1.4b1
My Project • 1 Aug 2014, 01:37 • blong 13 Aug 2014, 13:28
