Serial Note NRF communication stability problem
-
Hi,
I try to solve a communication problem with a temp/hum node.
The hardware : arduino nano + NRF24L01+.
The serial gateway : arduino nano + NRF24L01+ + Raspberry (Jeedom)
Node and Gateway in V2.2.
My node is detected correctly by the gateway.
When I start the node many messages can be send without problem (5/8 messages). After some messages are not be send correctly.
When MY_DEBUG is activate I can see (sometimes) troubleshooting when the node send message :
69117 !TSF:SND:TNR
70113 !TSM:FPAR:NO REPLY
70115 TSM:FPAR
72107 TSF:MSG:SEND,50-50-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
74114 !TSM:FPAR:NO REPLY
74116 TSM:FPAR
76107 TSF:MSG:SEND,50-50-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:Is anybody can help me ... thanks !
DaN
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login