Help with smartSleep()
-
Hi,
I would like to use smartSleep(). I saw that it is implemented with the method smartSleep(mils).
But I can't get it to work with MQTT on my Raspberry.- I have a Switch command and it is working without sleep() perfectly.
I mean the mqtt message is received in my node.
mysensors-in/11/2/1/0/command - Next I set up the node with smartSleep and it is sending a heart beat message every 10 seconds.
mysensors-out/11/255/3/0/22
But no Switch command that occured while smartSleep() is received now or resend by the gateway after te heartbeat.
Do I miss anything, do I have to activate something in the MQTT-Gateway on my Raspberry?
Ahhh I read that the controller has to support it. That is in my case OpenHab 2. Does anyone has a solution for that?
- I have a Switch command and it is working without sleep() perfectly.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login