Curtain Control Node
-
Hi Suresh,
It would be great if you added the schematics of your design as a PDF file. I guess you created the design in Eagle?
Thanaks in advance,
Ralph
@bisschopsr The design files are available on openhardware.io
-
@jemish You can look for on Aliexpress.
-
Goodmorning,
I try to load the sch file with egle but i get a error, can you help me.
I use eagle 5.11 proffecial.
In the picture of the schematic i don't see the ATSHA204-TSU and 25LC080SN can you help me with this.Greatz Ton Rijnaard
-
Goodmorning,
I try to load the sch file with egle but i get a error, can you help me.
I use eagle 5.11 proffecial.
In the picture of the schematic i don't see the ATSHA204-TSU and 25LC080SN can you help me with this.Greatz Ton Rijnaard
@TON-RIJNAARD I'll get back with libs for these parts. I am not in town and all files are on my desktop. Will send you once m back
-
Suresh Mali,
I have let make the board and now i try to complete the curtain
Can you help me where i connect the nss from the radio. i use the RFM 69, 433 mhz
How do i get te ino file in the atmega with the prog connector
You give me some answers in early question.Greatsz Ton
-
Goodmorning,
I try to load the sch file with egle but i get a error, can you help me.
I use eagle 5.11 proffecial.
In the picture of the schematic i don't see the ATSHA204-TSU and 25LC080SN can you help me with this.Greatz Ton Rijnaard
@TON-RIJNAARD
SparkFun-DigitalIC.lbr This lib has the ATSHA204.https://www.diymodules.org/eagle-show-object?type=usr&id=1937&part=microchip.lbr&device=25* here you can download the EEPROM lib
-
Suresh Mali,
I have let make the board and now i try to complete the curtain
Can you help me where i connect the nss from the radio. i use the RFM 69, 433 mhz
How do i get te ino file in the atmega with the prog connector
You give me some answers in early question.Greatsz Ton
@TON-RIJNAARD There is a ICSP header to program MCU. I dont use RFM69 so you'll have to modify the Sch file. NS pin connects to D10. More info here : https://www.mysensors.org/build/connect_radio shows on how to connect RFM69.
-
Suresh Mali,
Thx for the ersponse i give it a try.
D9 is that d100 perheps. -
Suresh,
How do i programm the chip.
I have try with arduino but don't now witch board i must select.
I have try it with arduin uno but i get only errors.
When everything is going okee i have load a bootloader in the atmega chip.
I use the programm connector on your board (6 pins streath) with a usb to 6 pins.Ton Rijnaard
-
Suresh,
How do i programm the chip.
I have try with arduino but don't now witch board i must select.
I have try it with arduin uno but i get only errors.
When everything is going okee i have load a bootloader in the atmega chip.
I use the programm connector on your board (6 pins streath) with a usb to 6 pins.Ton Rijnaard
@TON-RIJNAARD You need to select the board based on the bootloader you have flashed. Complile the code in Arduino and try burning the hex file using a programmer (USBasp, AVRISP, etc..) if are facing issues with Arduino.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login