Send a request message using Mysensors bindings
-
Hi guys!
I’m happily using the openHAB connectors to control my sensors through both openhab1 and openhab2.
Today, while I was developing a new sketch, I realized that I needed to periodically send a request message to my sensor to receive back in updated value.
I didn’t find a way to sort this out!
Is there anything I can do to have either openhab1 or 2 managing this?
Thanks in advance!
-
Hi @andreground !
Have a look at expert mode in the OH2 binding:
https://github.com/tobof/openhab2-addons/wiki/Expert-mode-(rule-based)This way you may send what you want.
-
-
I can't help you there, sorry.
4 out of 4
Suggested Topics
-
Boxes and Enclosures
Enclosures / 3D Printing • 29 Mar 2014, 21:02 • PITP2 31 Aug 2014, 19:27 -
openHAB 4 MySensors Binding
OpenHAB • 1 Aug 2023, 22:19 • ben999 7 Feb 2024, 14:25 -
openHAB 2.5 binding and V_VARx
OpenHAB • 25 May 2020, 15:49 • syntacrsc 4 May 2022, 20:47 -
OH3 - MySensors Binding
OpenHAB • 17 Dec 2020, 16:35 • Peter Loeffler 3 Dec 2023, 09:37 -
MQTT losing messages...
OpenHAB • 8 Jul 2022, 11:27 • ben999 17 Jul 2022, 18:00 -
OH3, RPi3, GPIO-NRF24 gateway. MySensors binding (ETH or MQTT?)
OpenHAB • 30 Sept 2021, 10:24 • perIpI 1 Oct 2021, 09:19