Send a request message using Mysensors bindings
-
Hi guys!
I’m happily using the openHAB connectors to control my sensors through both openhab1 and openhab2.
Today, while I was developing a new sketch, I realized that I needed to periodically send a request message to my sensor to receive back in updated value.
I didn’t find a way to sort this out!
Is there anything I can do to have either openhab1 or 2 managing this?
Thanks in advance!
-
Hi guys!
I’m happily using the openHAB connectors to control my sensors through both openhab1 and openhab2.
Today, while I was developing a new sketch, I realized that I needed to periodically send a request message to my sensor to receive back in updated value.
I didn’t find a way to sort this out!
Is there anything I can do to have either openhab1 or 2 managing this?
Thanks in advance!
Hi @andreground !
Have a look at expert mode in the OH2 binding:
https://github.com/tobof/openhab2-addons/wiki/Expert-mode-(rule-based)This way you may send what you want. :smile:
-
Hi @andreground !
Have a look at expert mode in the OH2 binding:
https://github.com/tobof/openhab2-addons/wiki/Expert-mode-(rule-based)This way you may send what you want. :smile:
-
I can't help you there, sorry.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login