Openhab2 disconnects from ethernet gateway.
-
Re: OpenHab don't want to reconnect after Gateway restart
@nofox
@TimO
First off, thanks for the great software @Timo!!
I have the same issue. Openhab2.1 running on a Rpi3 with openHAb 2.2.0 binding
I find if I reset my the gateway or even disconnect the ethernet cable for a few seconds, openHab loses connection with the gateway and I have to restart the controller. I have checked the network sanity settings and these all look in order. I have a default installation and find it strange that no-one else is experiencing the same problems. -
In PaperUI, goto Configuration/Things/MySensors Ethernet Gateway. Set Disable Network Sanity Check to On (the label is named backwards). This sends a status check at your defined interval. This will reconnect your gw if it fails x times. (See other config params on that page)
-
Thanks, this seems to work!!! I've been struggling for days and its as simple as an incorrect label!
@Timo are you aware of this? Should say "Enable Network Sanity Check" not "Disable Network Sanity Check"
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login